Router bits

JVL Chamfer bit 38.1 mm  45° with 8mm shank

JVL Chamfer bit 38.1 mm  45° with 8mm shank

Single flute cutter for plastic and aluminium

Single flute cutter for plastic and aluminium

Single flute cutter for plastic and aluminium

Single flute cutter for plastic and aluminium

ENT Straight Cutter TC / Two Flutes with grinded bottom cut...

ENT Straight Cutter TC / Two Flutes with grinded bottom cut and 8 mm shank.

Double flute milling cutter for plastic and aluminium

Double flute milling cutter for plastic and aluminium

Double flute milling cutter for plastic and aluminium

Double flute milling cutter for plastic and aluminium

ENT 10354 Straight Cutter with Centre Tip 4 x 12 x 50 mm with...

ENT 10354 Straight Cutter with Centre Tip 4 x 12 x 50 mm with 8 mm shank.

ENT 16200 Dovetail Cutter with Ball Bearing 12mm 14° 

ENT 16200 Dovetail Cutter with Ball Bearing 12mm 14° 

Dovetail bit HW Z=2 D=14 A=10° L=12 GL=49 S=8mm

Dovetail bit HW Z=2 D=14 A=10° L=12 GL=49 S=8mm

Specifically designed for cutting in hinges. stair treads and...

Specifically designed for cutting in hinges. stair treads and the general routing of larger flat bottom areas

Two flute solid carbide spiral bit 3 mm with 8 mm shank....

Two flute solid carbide spiral bit 3 mm with 8 mm shank. Positive (upcut) spiral.

This results in a particularly clean result with thin coatings...

This results in a particularly clean result with thin coatings and long-fiber funnels.

Rounding over cutter with extended and tapering cutting edges....

Rounding over cutter with extended and tapering cutting edges. This prevents adhesive residues from getting stuck between the cutting edges and the thrust bearing and causing excessive temperatures.

Titman Staff / corner bead bit with bearing HW Z=2 D=20 L=12...

Titman Staff / corner bead bit with bearing HW Z=2 D=20 L=12 R=2 S=8

Titman face milling router bit Z=3 D=25 L=12 GL=44 S=8

Titman face milling router bit Z=3 D=25 L=12 GL=44 S=8

Rounding over cutter R5  S8mm

Rounding over cutter R5  S8mm

Rounding over cutter R6.3  S8mm

Rounding over cutter R6.3  S8mm

Replacement tip bearing guide cutter. For coated boards, solid...

Replacement tip bearing guide cutter. For coated boards, solid wood and wood-basedmaterials

Face milling bit diameter 30 mm Titman FMC30-8RT

Face milling bit diameter 30 mm Titman FMC30-8RT

Replacement tip rebate cutter with bearing

Replacement tip rebate cutter with bearing

Profile cutter ROG20

Profile cutter ROG20

Pattern bit Z=2 D=19 L=12 S=8

Pattern bit Z=2 D=19 L=12 S=8