Filter By
Availability
Shank
Diameter (D)
Cutting length/height:
Total Length
Radius / Angle
Cutters
Router bits
Extensive program Professional routers for a perfect result.
JVL pro-line rounding over...
JVL pro-line rounding over bit 31.8mm
JVL pro-line rounding over bit 31.8mm
ENT trimming cutter TC 12.7...
ENT trimming cutter TC 12.7 x 25.4 x 68 mm with 8mm shank
ENT trimming cutter TC 12.7 x 25.4 x 68 mm with 8mm shank
Spiral finishing cutter D5...
Spiral finishing cutter upcut Z2
Spiral finishing cutter upcut Z2
- -10%
- -10%
Spiral finishing cutter D5...
Spiral finishing cutter downcut Z2
Spiral finishing cutter downcut Z2
- -10%
- -10%
Spiral bit solid carbide 5...
Two flute solid carbide spiral bit 5 mm with 8 mm shank....
Two flute solid carbide spiral bit 5 mm with 8 mm shank. Positive (upcut) spiral.
Ogee Cutter TC with Ball...
Two flute ogee cutter with exchangeable ball bearing and 8mm...
Two flute ogee cutter with exchangeable ball bearing and 8mm shank
Rounding over cutter R10...
Rounding over cutter R10 S=10mm
Rounding over cutter R10 S=10mm
- -10%
- -10%
Rounding over cutter D29...
Rounding over cutter with guide pin shank 8 mm
Rounding over cutter with guide pin shank 8 mm
- -10%
- -10%
Glue joint cutter TC ENT...
ENT 16430 Glue joint cutter TC for wood thicknesses from 15 to...
ENT 16430 Glue joint cutter TC for wood thicknesses from 15 to max. 25 mm. with 8 mm shank.
Rounding over cutter R10 S8mm
Rounding over cutter R10 S8mm
Rounding over cutter R10 S8mm
- -10%
- -10%
Rail- & Stile Cutter...
Two flutes. With exchangeable ball bearing. The set combines a...
Two flutes. With exchangeable ball bearing. The set combines a profile cutter and a slotter. Both on a bearing mounted arbor. Stile and rail are produced by reversing the cutter parts. For woodthickness from 19 to 21 mm
Rail- & Stile Cutter...
Two flutes. With exchangeable ball bearing. The set combines a...
Two flutes. With exchangeable ball bearing. The set combines a profile cutter and a slotter. Both on a bearing mounted arbor. Stile and rail are produced by reversing the cutter parts. For woodthickness from 19 to 21 mm
Rail- & Stile Cutter...
ENT 17440 Rail- & Stile Cutter Chamfer TC. Type A with 8...
ENT 17440 Rail- & Stile Cutter Chamfer TC. Type A with 8 mm shank. For woodthickness from 19 to 21 mm
Rail- & Stile Cutter...
Two flutes. With exchangeable ball bearing. The set combines a...
Two flutes. With exchangeable ball bearing. The set combines a profile cutter and a slotter. Both on a bearing mounted arbor. Stile and rail are produced by reversing the cutter parts. For woodthickness from 19 to 21 mm