Router bits

ENT Straight Cutter TC / Two Flutes with grinded bottom cut...

ENT Straight Cutter TC / Two Flutes with grinded bottom cut and 8 mm shank.

EPROCUT EPROCUT Top bearing straight bit HW Z=2 D=16 L=20...

EPROCUT EPROCUT Top bearing straight bit HW Z=2 D=16 L=20 GL=67 S=8

ENT Straight Cutter TC / Two Flutes with grinded bottom cut...

ENT Straight Cutter TC / Two Flutes with grinded bottom cut and 8 mm shank.

EPROCUT Top bearing straight bits HW Z=2 D=16 L=25 GL=72 S=8

EPROCUT Top bearing straight bits HW Z=2 D=16 L=25 GL=72 S=8

Straight bit shank 8mm

Straight bit shank 8mm

Suitable for: aluminum, copper, plastics

Suitable for: aluminum, copper, plastics

Straight bit shank 6 mm

Straight bit shank 6 mm

Bottom cutting. suitable for plunge. With 8 mm shank

Bottom cutting. suitable for plunge. With 8 mm shank

Straight bit shank 8mm

Straight bit shank 8mm

Straight cutter with two flutes for clean finish. For...

Straight cutter with two flutes for clean finish. For grooving, rebating and mortising. With TC centre tip. The TC centre tip is ideal for plunging and working in abrasive materials such as chipboard, MDF, plywood and hardwood.

Guttering cutter

Guttering cutter

Guttering cutter

Guttering cutter

Straight bit shank 8mm

Straight bit shank 8mm

Trimming cutter with bearing on shank for scanning overhead...

Trimming cutter with bearing on shank for scanning overhead templates. With centertip for immersion like a drill. Suitable for coated boards. solid woods and wood-basedmaterials.

Profile guide cutter with bearing on shank

Profile guide cutter with bearing on shank

Straight bit shank 8mm

Straight bit shank 8mm

Straight bit shank 12 mm

Straight bit shank 12 mm

Straight bit shank 12 mm

Straight bit shank 12 mm

Titman rounding cutter D=16,3 L=9 R=4 d=6,35 S=8

Titman rounding cutter D=16,3 L=9 R=4 d=6,35 S=8

PCD Diamond straight router bit bottom cutting

PCD Diamond straight router bit bottom cutting

PCD Diamond straight router bit bottom cutting

PCD Diamond straight router bit bottom cutting

PCD Diamond straight router bit bottom cutting

PCD Diamond straight router bit bottom cutting

Rounding over cutter with bearing for solid surface materials

Rounding over cutter with bearing for solid surface materials

Straight bit shank 8mm

Straight bit shank 8mm

Double chamfering bit HW Z=2+2 A=45 degrees L=15 S=6

Double chamfering bit HW Z=2+2 A=45 degrees L=15 S=6

Double chamfering bit HW Z=2+2 A=45 degrees L=15 S=8

Double chamfering bit HW Z=2+2 A=45 degrees L=15 S=8

Water channel cutter

Water channel cutter

Water channel cutter

Water channel cutter

Straight bit shank 12 mm

Straight bit shank 12 mm