Chamfer bit 38.1 mm 45°
JVL Chamfer bit 38.1 mm 45° with 8mm shank
JVL Chamfer bit 38.1 mm 45° with 8mm shank
Filter By
Availability
Shank
Diameter (D)
Cutting length/height:
Total Length
Radius / Angle
Cutters
Extensive program Professional routers for a perfect result.
There are 35 products.
JVL Chamfer bit 38.1 mm 45° with 8mm shank
JVL Chamfer bit 38.1 mm 45° with 8mm shank
ENT Straight Cutter TC / Two Flutes with grinded bottom cut...
ENT Straight Cutter TC / Two Flutes with grinded bottom cut and 8 mm shank.
ENT 17010 Staff Bead Cutter convex r 3.18 mm with 12 mm shank
ENT 17010 Staff Bead Cutter convex r 3.18 mm with 12 mm shank
Straight bit shank 8mm
Straight bit shank 8mm
Two flute ogee cutter with exchangeable ball bearing and 8mm...
Two flute ogee cutter with exchangeable ball bearing and 8mm shank
For milling a shadow gap or water surge at the basin and water...
For milling a shadow gap or water surge at the basin and water drainage channels on the sink.
V-Groove cutter 108° S8mm for ALUCOBOND, DiBOND, REYNOBOND
V-Groove cutter 108° S8mm for ALUCOBOND, DiBOND, REYNOBOND
Rounding over cutter with extended and tapering cutting edges....
Rounding over cutter with extended and tapering cutting edges. This prevents adhesive residues from getting stuck between the cutting edges and the thrust bearing and causing excessive temperatures.
Rounding over cutter with extended and tapering cutting edges....
Rounding over cutter with extended and tapering cutting edges. This prevents adhesive residues from getting stuck between the cutting edges and the thrust bearing and causing excessive temperatures.
Straight bit shank 8mm
Straight bit shank 8mm
Bevel cutter heavy duty
Bevel cutter heavy duty
Trimming bevel cutter with bearing
Trimming bevel cutter with bearing
Straight bit shank 12 mm
Straight bit shank 12 mm
Ballbearings diameter 16 mm and 12,7 mm included.
Ballbearings diameter 16 mm and 12,7 mm included.
Rebate cutter with bearing
Rebate cutter with bearing
Bevel cutter with high cutting length
Bevel cutter with high cutting length
Straight bit shank 12 mm
Straight bit shank 12 mm
rounding over both sides at once.Suitable for material...
rounding over both sides at once.Suitable for material thickness 16 tot 32 mm.Supplied with a range of shims.
Adjustable Double chamfering bit with bearing 16 to 32 mm....
Adjustable Double chamfering bit with bearing 16 to 32 mm. Titman BCS38-12
Titman Staff / corner bead bit with bearing HW Z=2 D=38 L=28...
Titman Staff / corner bead bit with bearing HW Z=2 D=38 L=28 R=9,5 S=8
V-Groove cutter, These cutters create a straight line of...
V-Groove cutter, These cutters create a straight line of approx. 1 mm at the bottom.
Straight bit shank 12 mm
Straight bit shank 12 mm
Replacement tip Straight bit Z=2 Shank 12 mm
Replacement tip Straight bit Z=2 Shank 12 mm
Shallow finger pull cutter
Shallow finger pull cutter
Replacement tip straight cutter internal thread M12x1
Replacement tip straight cutter internal thread M12x1