- Home
-
- Router bits
- Cutters For woodworking
- Rounding over bits
- Straight bits
- Surface trimming bits
- Flute & bead bit
- Chamfering bits
- Dovetail bits
- Flush trim bit
- Stepped rebate bit
- Spiral bits
- Pattern bit / Top bearing straight bits
- Slotting cutters
- Staff / corner bead bit
- V-Groove Bits
- Weatherseal bits
- T-Slot cutter
- Finger pull cutters / Handrail cutter
- Cove bit
- Tongue and groove cutters
- Rebate Cutters
- Raised panel cutters
- Barley twist cutter
- Profile cutter
- Glue joint cutter
- Router bits For corian / HIMACS
- Router bits for plastics
- Router bits / endmills for metal
- Router bits For Aluminum, ALUCOBOND, DiBOND, REYNOBOND
- Window and door tooling
- Diamond router bits - PCD
- Parts
- Collets and accessories
- Cutters For woodworking
- Cutterheads
- Replaceable knives
- Saw blades
- Drills
- Bearings
- Inner diameter up to 10mm
- Inner diameter 1,5mm
- Inner diameter 2mm
- Inner diameter 2,38mm - 3/32 inch
- Inner diameter 2,5mm
- Inner diameter 3mm
- inner diameter 3,17mm - 1/8 inch
- Inner diameter 4mm
- Inner diameter 4,75mm - 3/16 inch
- inner diameter 5mm
- Inner diameter 6mm
- Inner diameter 6,35mm - 1/4 inch
- Inner diameter 7mm
- Inner diameter 7,94mm - 5/16 inch
- Inner diameter 8mm
- Inner diameter 9mm
- Inner diameter 9,52mm - 3/8 inch
- Inner diameter from 10 to 20mm
- Inner diameter 20mm and larger
- Inner diameter up to 10mm
- Virutex
- Machines
- Accessories
- Consumables
- Spare Parts
- AB11C Parts
- AB111N Parts
- AB181 Parts
- AG98 parts
- AP98 Parts
- Parts for CE machines
- Parts for EB machines
- FC116U Parts
- FC16S Parts
- FP192VB Parts
- Parts for FR machines
- LB31E Parts
- LRE46L Parts
- LRT84H Parts
- M75 Parts
- O81 N Parts
- PEB50, PEB250 Parts
- RA17 Parts
- RTE46L Parts
- Parts for TM machines
- RZ170N Parts
- RZ70M Parts
- Other parts
- Other products
- Sale
- Router bits
Filter By
Availability
Shank
Diameter (D)
Cutting length/height:
Total Length
Radius / Angle
Cutters
Router bits
Extensive program Professional routers for a perfect result.
There are 63 products.
Spiral cutter Positiv for...
Solid carbide milling cutters for plastic processing,...
Solid carbide milling cutters for plastic processing, particularly suitable for acrylic. The spiral cuts result in virtually no heat development and the cutting pressure is very low. Cutting on the diameter with ground cut. Clockwise rotation
- -10%
- -10%
Spiral cutter Negative for...
Solid carbide milling cutters for plastic processing,...
Solid carbide milling cutters for plastic processing, particularly suitable for acrylic. The spiral cuts result in virtually no heat development and the cutting pressure is very low. Cutting on the diameter with ground cut. Clockwise rotation
- -10%
- -10%
Spiral cutter Negative for...
Solid carbide milling cutters for plastic processing,...
Solid carbide milling cutters for plastic processing, particularly suitable for acrylic. The spiral cuts result in virtually no heat development and the cutting pressure is very low. Cutting on the diameter with ground cut. Clockwise rotation
- -10%
- -10%
Spiral cutter Positiv for...
Solid carbide milling cutters for plastic processing,...
Solid carbide milling cutters for plastic processing, particularly suitable for acrylic. The spiral cuts result in virtually no heat development and the cutting pressure is very low. Cutting on the diameter with ground cut. Clockwise rotation
- -10%
- -10%
Spiral cutter Positiv for...
Solid carbide milling cutters for plastic processing,...
Solid carbide milling cutters for plastic processing, particularly suitable for acrylic. The spiral cuts result in virtually no heat development and the cutting pressure is very low. Cutting on the diameter with ground cut. Clockwise rotation
- -10%
- -10%
BTL2 10x100
Suitable for: Steel, Stainless steel, Cast iron, aluminum,...
Suitable for: Steel, Stainless steel, Cast iron, aluminum, copper and plastics
BTXL2 4,0x100
Suitable for: Steel, Stainless steel, Cast iron, aluminum,...
Suitable for: Steel, Stainless steel, Cast iron, aluminum, copper and plastics
Single flute cutter D8 L70...
Single flute cutter with neck for plastic and aluminium
Single flute cutter with neck for plastic and aluminium
- -10%
- -10%
Single flute cutter D8 L68...
Single flute cutter with neck for plastic and aluminium
Single flute cutter with neck for plastic and aluminium
- -10%
- -10%
MSL 10,0 x 100
Suitable for: Steel, Stainless steel, Cast iron, Aluminum and...
Suitable for: Steel, Stainless steel, Cast iron, Aluminum and copper
Single flute D6 L14 S8mm...
Single flute cutter for plastic and aluminium
Single flute cutter for plastic and aluminium
- -10%
- -10%
Single flute D8 L25 S8mm...
Single flute cutter for plastic and aluminium
Single flute cutter for plastic and aluminium
- -10%
- -10%
Water slot cutter D5 GL100...
Water slot cutter for plastic and aluminium
Water slot cutter for plastic and aluminium
- -10%
- -10%
Water slot cutter D6 L30...
Water slot cutter for plastic and aluminium
Water slot cutter for plastic and aluminium
- -10%
- -10%
Single flute D4 L40 S8mm...
Single flute cutter for plastic and aluminium
Single flute cutter for plastic and aluminium
- -10%
- -10%
Single flute D6 L40 S8mm...
Single flute cutter for plastic and aluminium
Single flute cutter for plastic and aluminium
- -10%
- -10%
Single flute D5 L40 S8mm...
Single flute cutter for plastic and aluminium
Single flute cutter for plastic and aluminium
- -10%
- -10%
Water slot cutter D4 S8mm...
Water slot cutter for plastic and aluminium
Water slot cutter for plastic and aluminium
- -10%
- -10%
Water slot cutter D5 L55...
Water slot cutter for plastic and aluminium
Water slot cutter for plastic and aluminium
- -10%
- -10%
Single flute D12 L28 S8mm...
Single flute cutter for plastic and aluminium
Single flute cutter for plastic and aluminium
- -10%
- -10%
Water slot cutter D5 L45...
Water slot cutter for plastic and aluminium
Water slot cutter for plastic and aluminium
- -10%
- -10%
Double flute milling cutter...
Double flute milling cutter for plastic and aluminium
Double flute milling cutter for plastic and aluminium
- -10%
- -10%
Water slot cutter D6 L45...
Water slot cutter for plastic and aluminium
Water slot cutter for plastic and aluminium
- -10%
- -10%
Double flute milling cutter...
Double flute milling cutter for plastic and aluminium
Double flute milling cutter for plastic and aluminium
- -10%
- -10%
Straight bit D12.7 L50 S12mm
Straight bit shank 12 mm
Straight bit shank 12 mm
- -10%
- -10%
Straight bit 18mm L30...
Straight bit shank 8mm
Straight bit shank 8mm
- -10%
- -10%
Straight bit D14 L50 S12mm
Straight bit shank 12 mm
Straight bit shank 12 mm
- -10%
- -10%