Straight Cutter TC Z1 D3 S8mm
ENT Straight Cutter TC / One Flute with 8 mm shank
ENT Straight Cutter TC / One Flute with 8 mm shank
Filter By
Availability
Outside diameter
Shank
Diameter (D)
Cutting length/height:
Total Length
Radius / Angle
Cutters
Extensive program Professional routers for a perfect result.
There are 53 products.
ENT Straight Cutter TC / One Flute with 8 mm shank
ENT Straight Cutter TC / One Flute with 8 mm shank
Spiral cutter Z1 Negative - Down cut for Plastics Suitable...
Spiral cutter Z1 Negative - Down cut for Plastics Suitable for: Acrylonitrile butadiene styrene (ABS) Polycarbonate Polyethylene Polypropylene Polystyrene Polyvinyl chloride (PVC) Polymethyl methacrylate (Acrylic. Plexi etc.)
Spiral cutter Z1 Negative - Down cut for Plastics Suitable...
Spiral cutter Z1 Negative - Down cut for Plastics Suitable for: Acrylonitrile butadiene styrene (ABS) Polycarbonate Polyethylene Polypropylene Polystyrene Polyvinyl chloride (PVC) Polymethyl methacrylate (Acrylic. Plexi etc.)
Spiral cutter Z1 Positive - Upcut for Plastics Suitable for:...
Spiral cutter Z1 Positive - Upcut for Plastics Suitable for: Acrylonitrile butadiene styrene (ABS) Polycarbonate Polyethylene Polypropylene Polystyrene Polyvinyl chloride (PVC) Polymethyl methacrylate (Acrylic. Plexi etc.)
Spiral cutter Z1 Positive - Upcut for Plastics Suitable for:...
Spiral cutter Z1 Positive - Upcut for Plastics Suitable for: Acrylonitrile butadiene styrene (ABS) Polycarbonate Polyethylene Polypropylene Polystyrene Polyvinyl chloride (PVC) Polymethyl methacrylate (Acrylic. Plexi etc.)
Spiral cutter Z1 Positive - Upcut for Plastics Suitable for:...
Spiral cutter Z1 Positive - Upcut for Plastics Suitable for: Acrylonitrile butadiene styrene (ABS) Polycarbonate Polyethylene Polypropylene Polystyrene Polyvinyl chloride (PVC) Polymethyl methacrylate (Acrylic. Plexi etc.)
Spiral cutter Z1 Negative - Down cut for Plastics Suitable...
Spiral cutter Z1 Negative - Down cut for Plastics Suitable for: Acrylonitrile butadiene styrene (ABS) Polycarbonate Polyethylene Polypropylene Polystyrene Polyvinyl chloride (PVC) Polymethyl methacrylate (Acrylic. Plexi etc.)
Spiral cutter Z1 Positive - Upcut for Plastics Suitable for:...
Spiral cutter Z1 Positive - Upcut for Plastics Suitable for: Acrylonitrile butadiene styrene (ABS) Polycarbonate Polyethylene Polypropylene Polystyrene Polyvinyl chloride (PVC) Polymethyl methacrylate (Acrylic. Plexi etc.)
Straight bit shank 8mm
Straight bit shank 8mm
Straight bit shank 6 mm
Straight bit shank 6 mm
Straight bit shank 8mm
Straight bit shank 8mm
Straight bit shank 8mm
Straight bit shank 8mm
Straight bit shank 8mm
Straight bit shank 8mm
Straight bit shank 6 mm
Straight bit shank 6 mm
Straight bit shank 12 mm
Straight bit shank 12 mm
Straight bit shank 12 mm
Straight bit shank 12 mm
Straight bit shank 8mm
Straight bit shank 8mm
Dovetail bit Z=2 D=10 A=10° L=9 GL=45 S=8
Dovetail bit Z=2 D=10 A=10° L=9 GL=45 S=8
Dovetail bit HW Z=2 D=12 A=10° L=10 GL=46 S=8
Dovetail bit HW Z=2 D=12 A=10° L=10 GL=46 S=8
Straight bit shank 8mm
Straight bit shank 8mm
This results in a particularly clean result with thin coatings...
This results in a particularly clean result with thin coatings and long-fiber funnels.
This results in a particularly clean result with thin coatings...
This results in a particularly clean result with thin coatings and long-fiber funnels.
Dovetail bit HW Z=2 D=20 A=10 degrees L=16 GL=52 S=10
Dovetail bit HW Z=2 D=20 A=10 degrees L=16 GL=52 S=10
Dovetail bit HW Z=2 D=20 A=10° L=16 GL=52 S=8
Dovetail bit HW Z=2 D=20 A=10° L=16 GL=52 S=8
Straight cutter with two flutes for clean finish. For...
Straight cutter with two flutes for clean finish. For grooving, rebating and mortising. With TC centre tip. The TC centre tip is ideal for plunging and working in abrasive materials such as chipboard, MDF, plywood and hardwood.
Trimmers with bearing
Trimmers with bearing
Trimmers with bearing
Trimmers with bearing
Radius engraving cutter These double-edged cutters create a...
Radius engraving cutter These double-edged cutters create a flat of approx. 1 mm at the bottom.
Radius engraving cutter These double-edged cutters create a...
Radius engraving cutter These double-edged cutters create a flat of approx. 1 mm at the bottom.