Single flute cutter D5 L35...
Single flute cutter with neck for plastic and aluminium
Single flute cutter with neck for plastic and aluminium
- -10%
- -10%
Filter By
Availability
Shank
Diameter (D)
Cutting length/height:
Total Length
Radius / Angle
Cutters
There are 22 products.
Active filters
Single flute cutter with neck for plastic and aluminium
Single flute cutter with neck for plastic and aluminium
ENT trimming cutter TC 12.7 x 25.4 x 68 mm with 8mm shank
ENT trimming cutter TC 12.7 x 25.4 x 68 mm with 8mm shank
JVL Rounding over router bit R 7.9 mm with 8mm shank
JVL Rounding over router bit R 7.9 mm with 8mm shank
JVL Rounding over router bit R 4.8 mm with 8mm shank
JVL Rounding over router bit R 4.8 mm with 8mm shank
JVL Chamfer bit 38.1 mm 45° with 8mm shank
JVL Chamfer bit 38.1 mm 45° with 8mm shank
JVL pro-line solid carbide flush trim bit S8mm
JVL pro-line solid carbide flush trim bit S8mm
Radius engraving cutter These double-edged cutters create a...
Radius engraving cutter These double-edged cutters create a flat of approx. 1 mm at the bottom.
JVL Rounding over router bit R 6.35 mm with 8mm shank
JVL Rounding over router bit R 6.35 mm with 8mm shank
Bearing guide cutter for trimming protruding veneer and...
Bearing guide cutter for trimming protruding veneer and plastic edges. Also possible tocopy using a template. The small diameters are ideal for processing inside corners.
Replacement tip bearing guide cutter. For coated boards, solid...
Replacement tip bearing guide cutter. For coated boards, solid wood and wood-basedmaterials
Titman Staff / corner bead bit with bearing HW Z=2 D=38 L=28...
Titman Staff / corner bead bit with bearing HW Z=2 D=38 L=28 R=9,5 S=8
Titman rounding over cutter R=2 S=8
Titman rounding over cutter R=2 S=8
Miniature bevel cutter with bearing 45 degrees
Miniature bevel cutter with bearing 45 degrees
Titman face milling router bit for wood D=35 L=18 Shank 8 mm
Titman face milling router bit for wood D=35 L=18 Shank 8 mm
Titman face milling router bit Z=3 D=25 L=12 GL=44 S=8
Titman face milling router bit Z=3 D=25 L=12 GL=44 S=8