BI-METAL EasyXcut M3 hole...
Bi-metal M3 Hole Saws with vario-pitched teeth for...
Bi-metal M3 Hole Saws with vario-pitched teeth for applications where fast cutting and low price are the main challenges.
Filter By
Availability
Shank
Diameter (D)
Cutting length/height:
Total Length
Direction of rotation
Drills
There are 9 products.
Bi-metal M3 Hole Saws with vario-pitched teeth for...
Bi-metal M3 Hole Saws with vario-pitched teeth for applications where fast cutting and low price are the main challenges.
Bi-metal M3 Hole Saws with vario-pitched teeth for...
Bi-metal M3 Hole Saws with vario-pitched teeth for applications where fast cutting and low price are the main challenges.
For drill bits with 10 mm shank and clamping surface. Suitable...
For drill bits with 10 mm shank and clamping surface. Suitable for machines from: Morbidelli, Biesse, Weeke, Reimall, Torwegge, Busellato, Bottcher, Gessner, Ayen S = M10x1,5 mmD = 19 mmL = 31 mmGL = 47 mm
For drill bits with 10 mm shank and clamping surface. Suitable...
For drill bits with 10 mm shank and clamping surface. Suitable for machines from: Morbidelli, Biesse, Weeke, Reimall, Torwegge, Busellato, Bottcher, Gessner, Ayen S = M10x1,5 mmD = 19 mmL = 31 mmGL = 47 mm
For drill bits with 10 mm shank and clamping surface. Suitable...
For drill bits with 10 mm shank and clamping surface. Suitable for machines from: Albert, SCM, Schleicher, Vitap, Balestrini, Ombe, Bilek S = M10x1,5 mmD = 19 mmA = 15°L = 20 mmGL = 46 mm
For drill bits with 10 mm shank and clamping surface. Suitable...
For drill bits with 10 mm shank and clamping surface. Suitable for machines from: Albert, SCM, Schleicher, Vitap, Balestrini, Ombe, Bilek S = M10x1,5 mmD = 19 mmA = 15°L = 20 mmGL = 46 mm
For use on twist drills with a 10 mm shank and a diameter of 4...
For use on twist drills with a 10 mm shank and a diameter of 4 mm to 10 mm.The countersinkis guided to the shank via the drill spiral and fastened there.
For use on twist drills with a 10 mm shank and a diameter of 4...
For use on twist drills with a 10 mm shank and a diameter of 4 mm to 10 mm.The countersinkis guided to the shank via the drill spiral and fastened there.
Drills