Cutterheads

Stark Adjustable grooving 160 x 4-7,5 Z=4 V=4

Half round set (R = 8-9-10 included)

Cutterhead with HW reversible knives and spurs for making precision grooves.

Mitre joint cutterhead 45 degrees

Stark rebate cutter steel body 150 x 50 mm

Steel body with standard tungsten carbide profiled knives for quarter rounds, axial angle for excellentmilling results and reduced cutting pressure

Cutterhead with adjustable angle knives for chamfering 140 mm aluminum bore 30mm Cutterhead in light alloy with HM reversible knives. The two wings are adjustable every 7.5 degrees from 0 degrees to90 degrees. Thanks to the particular construction. this tool is of universal use.

Cutterhead with HW reversible knives and spurs on both sides rebating and edging. Suitable for solid soft wood, chipboard, veneered and laminated panels, plywood, etc.

Stark Adjustable grooving TYPE A - 140X4-7,5 Z=4 V=4

Cutterhead with steel body, tungsten carbide standard reversible knives and spurs, adjustable with 1/10 mm spacing rings (included) for high precision groove cutting,

for high precision groove cutting, chip thickness limitation and reduced recoil, suitable for manual and mechanical feed.

Kitchen cabinet set

Steel body. standard tungsten carbide profiled knives for milling hardwood and softwood. chip thicknesslimitation and reduced recoil. suitable for both manual and mechanical feed.

Steel body with tungsten carbide profiled knives, for high precision panel raising

Steel body with tungsten carbide profiled knives, for high precision panel raising,

adjustable grooving TYPE A - 160x 12,4 -24 mm

adjustable cutterhead for tenons 200 x 8-15 mm Z=4 V=4

Steel body, standard tungsten carbide profiled knives for milling hardwood and softwood, chip thicknesslimitation and reduced recoil, suitable for both manual and mechanical feed.

Stark adjustable cutterhead for tenons 250x8-15 TH06TM10

Stark cutterhead variable angle 160mm

Stark adjustable grooving TYPE A - 160 x 16-30 mm

Adjustable grooving cutter TYPE A + B - 140 x 4-15 mm Z=4+2 V=4

YS118 Bore 30mm.    Cutterset consisting of two elements in light alloy execution. standard tungsten carbide reversible knives.for high precision planning and chamfering/rounding in one single working operation. adjustable formilling solid wood and all types of board material from 18-50 mm...

Cutterhead with HW reversible knives and spurs for making thin precision grooves , adjustable by means of spacing rings. Spacing rings are included.

YS112AZM Set consisting of 2 profile cutters in light alloy execution and an adjustable groover 8-15 mm (can also be used seperately!). for machining door profiles and counterprofiles with maximum flexibility. 5 different profiles can be mounted on the same cutterhead.set complete with spacing...

Cutterhead with steel body mounted on threaded bush. tungsten carbide standard reversible knives and spurs. 1/10 mm stepless adjustability for high precision groove cutting. chip thickness limitation and reduced recoil. suitable for manual feed.

Bore 30mm Cutterhead with steel body. tungsten carbide standard reversible knives and spurs. adjustable with 1/10mm spacing rings (included) for high precision groove cutting. chip thickness limitation and reducedrecoil. suitable for manual and mechanical feed. Grooves 8 to 28 mm

Steel body with standard tungsten carbide profiled knives for quarter rounds, axial angle for excellentmilling results and reduced cutting pressure, different radius can be fitted onto the same tool body,  R=3, 4, 5, 6, 8 and 10mm included

adjustable grooving TYPE A + B - 160 x 16-44mm