BI-METAL EasyXcut M3 hole...
Bi-metal M3 Hole Saws with vario-pitched teeth for...
Bi-metal M3 Hole Saws with vario-pitched teeth for applications where fast cutting and low price are the main challenges.
Filter By
Availability
Shank
Diameter (D)
Cutting length/height:
Total Length
Radius / Angle
Cutters
There are 95 products.
Bi-metal M3 Hole Saws with vario-pitched teeth for...
Bi-metal M3 Hole Saws with vario-pitched teeth for applications where fast cutting and low price are the main challenges.
ENT Straight Cutter TC / Two Flutes with grinded bottom cut...
ENT Straight Cutter TC / Two Flutes with grinded bottom cut and 8 mm shank.
S = M10x1,5 mm D = 18 mmL = 25 mmGL = 50 mm
S = M10x1,5 mm D = 18 mmL = 25 mmGL = 50 mm
S = M10x1,5 mm D = 18 mmL = 25 mmGL = 50 mm
S = M10x1,5 mm D = 18 mmL = 25 mmGL = 50 mm
S = M10x1,5 mm D = 18 mmL = 25 mmGL = 50 mm
S = M10x1,5 mm D = 18 mmL = 25 mmGL = 50 mm
S = M10x1,5 mm D = 18 mmL = 25 mmGL = 50 mm
S = M10x1,5 mm D = 18 mmL = 25 mmGL = 50 mm
ENT Straight Cutter TC / Two Flutes with grinded bottom cut...
ENT Straight Cutter TC / Two Flutes with grinded bottom cut and 8 mm shank.
Suitable for: Steel, Stainless steel, Cast iron, Aluminum and...
Suitable for: Steel, Stainless steel, Cast iron, Aluminum and copper
Straight bit shank 8mm
Straight bit shank 8mm
Straight bit shank 6 mm
Straight bit shank 6 mm
This results in a particularly clean result with thin coatings...
This results in a particularly clean result with thin coatings and long-fiber funnels.
This results in a particularly clean result with thin coatings...
This results in a particularly clean result with thin coatings and long-fiber funnels.
This results in a particularly clean result with thin coatings...
This results in a particularly clean result with thin coatings and long-fiber funnels.
This results in a particularly clean result with thin coatings...
This results in a particularly clean result with thin coatings and long-fiber funnels.
This results in a particularly clean result with thin coatings...
This results in a particularly clean result with thin coatings and long-fiber funnels.
Straight bit shank 8mm
Straight bit shank 8mm
Straight cutter with two flutes for clean finish. For...
Straight cutter with two flutes for clean finish. For grooving, rebating and mortising. With TC centre tip. The TC centre tip is ideal for plunging and working in abrasive materials such as chipboard, MDF, plywood and hardwood.
Trimmers with bearing
Trimmers with bearing
Trimmers with bearing
Trimmers with bearing
Straight bit shank 8mm
Straight bit shank 8mm
Straight bit shank 8mm
Straight bit shank 8mm
Straight bit shank 8mm
Straight bit shank 8mm
For chamfering thin sheets, plywood, acrylic, etc. For...
For chamfering thin sheets, plywood, acrylic, etc. For interior and exterior contours.
For chamfering thin sheets, plywood, acrylic, etc. For...
For chamfering thin sheets, plywood, acrylic, etc. For interior and exterior contours.