Home

Bi-metal M3 Hole Saws with vario-pitched teeth for...

Bi-metal M3 Hole Saws with vario-pitched teeth for applications where fast cutting and low price are the main challenges.

ENT Straight Cutter TC / Two Flutes with grinded bottom cut...

ENT Straight Cutter TC / Two Flutes with grinded bottom cut and 8 mm shank.

Straight bit shank 8mm

Straight bit shank 8mm

For milling a shadow gap or water surge at the basin and water...

For milling a shadow gap or water surge at the basin and water drainage channels on the sink.

V-Groove cutter  108°  S8mm for ALUCOBOND, DiBOND, REYNOBOND

V-Groove cutter  108°  S8mm for ALUCOBOND, DiBOND, REYNOBOND

Rounding over cutter with extended and tapering cutting edges....

Rounding over cutter with extended and tapering cutting edges. This prevents adhesive residues from getting stuck between the cutting edges and the thrust bearing and causing excessive temperatures.

Rounding over cutter with extended and tapering cutting edges....

Rounding over cutter with extended and tapering cutting edges. This prevents adhesive residues from getting stuck between the cutting edges and the thrust bearing and causing excessive temperatures.

Straight bit shank 8mm

Straight bit shank 8mm

Trimming bevel cutter with bearing

Trimming bevel cutter with bearing

Straight bit shank 12 mm

Straight bit shank 12 mm

Ballbearings diameter 16 mm and 12,7 mm included.

Ballbearings diameter 16 mm and 12,7 mm included.

Straight bit shank 12 mm

Straight bit shank 12 mm

Straight bit shank 12 mm

Straight bit shank 12 mm

Bore 30 mm. Cutterhead with HW reversible knives and spurs on...

Bore 30 mm. Cutterhead with HW reversible knives and spurs on both sides rebating and edging. Suitable for solid soft wood. chipboard. veneered and laminated panels. plywood. etc.The shear angle allows a better chip removal and a longer cutting edge life.

Stark along grain joint cutter 125X50 Z=2 YH152AAM

Stark along grain joint cutter 125X50 Z=2 YH152AAM

Bore 50mm.  Cutterhead with HW reversible knives and spurs on...

Bore 50mm.  Cutterhead with HW reversible knives and spurs on both sides rebating and edging. Suitable for solid soft wood. chipboard. veneered and laminated panels. plywood. etc.The shear angle allows a better chip removal and a longer cutting edge life.

Bore 40mm.  Cutterhead with HW reversible knives and spurs on...

Bore 40mm.  Cutterhead with HW reversible knives and spurs on both sides rebating and edging. Suitable for solid soft wood. chipboard. veneered and laminated panels. plywood. etc.The shear angle allows a better chip removal and a longer cutting edge life.

Stark along grain joint cutter 125X50 Z=2 YH152AAM

Stark along grain joint cutter 125X50 Z=2 YH152AAM

Stark along grain joint cutter 125X50 Z=2 YH152AAM

Stark along grain joint cutter 125X50 Z=2 YH152AAM

Stark along grain joint cutter 125X50 Z=2 YH152AAM

Stark along grain joint cutter 125X50 Z=2 YH152AAM

Stark along grain joint cutter 125X50 Z=2 YH152AAM

Stark along grain joint cutter 125X50 Z=2 YH152AAM

High tensile steel tool body fitted with four HSS planing...

High tensile steel tool body fitted with four HSS planing knives. Positioning of the 30x3 mm regrindableknives with appropriate gauge. MEC