BI-METAL EasyXcut M3 hole...
Bi-metal M3 Hole Saws with vario-pitched teeth for...
Bi-metal M3 Hole Saws with vario-pitched teeth for applications where fast cutting and low price are the main challenges.
Filter By
Availability
Shank
Diameter (D)
Cutting length/height:
Total Length
Radius / Angle
Cutters
There are 34 products.
Bi-metal M3 Hole Saws with vario-pitched teeth for...
Bi-metal M3 Hole Saws with vario-pitched teeth for applications where fast cutting and low price are the main challenges.
JVL Chamfer bit 38.1 mm 45° with 8mm shank
JVL Chamfer bit 38.1 mm 45° with 8mm shank
ENT 17010 Staff Bead Cutter convex r 3.18 mm with 12 mm shank
ENT 17010 Staff Bead Cutter convex r 3.18 mm with 12 mm shank
Two flute ogee cutter with exchangeable ball bearing and 8mm...
Two flute ogee cutter with exchangeable ball bearing and 8mm shank
For chamfering thin sheets, plywood, acrylic, etc. For...
For chamfering thin sheets, plywood, acrylic, etc. For interior and exterior contours.
Bevel cutter with real center cutting edge for direct...
Bevel cutter with real center cutting edge for direct immersion in the material. For foldingand chamfering wood, laminate and plastic sheets.
Bevel cutter heavy duty
Bevel cutter heavy duty
Bevel cutter with bearing
Bevel cutter with bearing
Straight bit shank 8mm
Straight bit shank 8mm
Bevel cutter with bearing for solid surface
Bevel cutter with bearing for solid surface
Rebate cutter with bearing
Rebate cutter with bearing
Bevel cutter with high cutting length
Bevel cutter with high cutting length
Straight bit shank 12 mm
Straight bit shank 12 mm
Diamond PCD rounding over bit Shank 8 mm
Diamond PCD rounding over bit Shank 8 mm
rounding over both sides at once.Suitable for material...
rounding over both sides at once.Suitable for material thickness 16 tot 32 mm.Supplied with a range of shims.
T-Slot cutter with radius
T-Slot cutter with radius
Adjustable Double chamfering bit with bearing 16 to 32 mm....
Adjustable Double chamfering bit with bearing 16 to 32 mm. Titman BCS38-12
Titman Staff / corner bead HW Z=2 D=28,7 L=23 R=6,3 S=8
Titman Staff / corner bead HW Z=2 D=28,7 L=23 R=6,3 S=8
Titman Staff / corner bead bit with bearing HW Z=2 D=38 L=28...
Titman Staff / corner bead bit with bearing HW Z=2 D=38 L=28 R=9,5 S=8
Diamond PCD rounding over bit Shank 8 mm
Diamond PCD rounding over bit Shank 8 mm
V-Groove cutter, These cutters create a straight line of...
V-Groove cutter, These cutters create a straight line of approx. 1 mm at the bottom.
Profile mould cutter
Profile mould cutter
The following items are required to create the appropriate...
The following items are required to create the appropriate groove:Groover G36552-6.35 and arbor LDTA/8