JVL pro-line roundnose bit...
JVL pro-line roundnose bit D 19 mm
JVL pro-line roundnose bit D 19 mm
Filter By
Availability
Shank
Diameter (D)
Cutting length/height:
Total Length
Radius / Angle
Cutters
There are 85 products.
JVL pro-line roundnose bit D 19 mm
JVL pro-line roundnose bit D 19 mm
Bi-metal M3 Hole Saws with vario-pitched teeth for...
Bi-metal M3 Hole Saws with vario-pitched teeth for applications where fast cutting and low price are the main challenges.
Bi-metal M3 Hole Saws with vario-pitched teeth for...
Bi-metal M3 Hole Saws with vario-pitched teeth for applications where fast cutting and low price are the main challenges.
For drill bits with 10 mm shank and clamping surface. Suitable...
For drill bits with 10 mm shank and clamping surface. Suitable for machines from: Morbidelli, Biesse, Weeke, Reimall, Torwegge, Busellato, Bottcher, Gessner, Ayen S = M10x1,5 mmD = 19 mmL = 31 mmGL = 47 mm
For drill bits with 10 mm shank and clamping surface. Suitable...
For drill bits with 10 mm shank and clamping surface. Suitable for machines from: Morbidelli, Biesse, Weeke, Reimall, Torwegge, Busellato, Bottcher, Gessner, Ayen S = M10x1,5 mmD = 19 mmL = 31 mmGL = 47 mm
For drill bits with 10 mm shank and clamping surface. Suitable...
For drill bits with 10 mm shank and clamping surface. Suitable for machines from: Albert, SCM, Schleicher, Vitap, Balestrini, Ombe, Bilek S = M10x1,5 mmD = 19 mmA = 15°L = 20 mmGL = 46 mm
For drill bits with 10 mm shank and clamping surface. Suitable...
For drill bits with 10 mm shank and clamping surface. Suitable for machines from: Albert, SCM, Schleicher, Vitap, Balestrini, Ombe, Bilek S = M10x1,5 mmD = 19 mmA = 15°L = 20 mmGL = 46 mm
Hinge boring bit with centre point and two bevelled flutes....
Hinge boring bit with centre point and two bevelled flutes. Because of their specially designed cutting edges they allow use on high speed machines up to 27000 rpm. Shank without flat for use on routing machines.
ENT trimming cutter TC 19 x 19 x 62 mm with 8mm shank
ENT trimming cutter TC 19 x 19 x 62 mm with 8mm shank
Straight bit shank 8mm
Straight bit shank 8mm
Specifically designed for cutting in hinges. stair treads and...
Specifically designed for cutting in hinges. stair treads and the general routing of larger flat bottom areas
Water channel cutter with bearing
Water channel cutter with bearing
Replacement tip bearing guide cutter. For coated boards, solid...
Replacement tip bearing guide cutter. For coated boards, solid wood and wood-basedmaterials
Straight bit shank 8mm
Straight bit shank 8mm
Bearing guide trimmer Z2 for solid surface Suitable for...
Bearing guide trimmer Z2 for solid surface Suitable for Corian Hi-Macs Staron Avonite Hanex Varicor domovari
Side slotting cutter Shank 12 mm
Side slotting cutter Shank 12 mm
Side slotting cutter Shank 8 mm
Side slotting cutter Shank 8 mm
Side slotting cutter Shank 12 mm
Side slotting cutter Shank 12 mm
Side slotting cutter Shank 8 mm
Side slotting cutter Shank 8 mm
Side slotting cutter Shank 12 mm
Side slotting cutter Shank 12 mm
Side slotting cutter Shank 8 mm
Side slotting cutter Shank 8 mm
Side slotting cutter Shank 12 mm
Side slotting cutter Shank 12 mm
Bevel cutter with real center cutting edge for direct...
Bevel cutter with real center cutting edge for direct immersion in the material. For foldingand chamfering wood, laminate and plastic sheets.
Side slotting cutter Shank 8 mm
Side slotting cutter Shank 8 mm
Trimming cutter with bearing on shank for scanning overhead...
Trimming cutter with bearing on shank for scanning overhead templates. With centertip for immersion like a drill. Suitable for coated boards. solid woods and wood-basedmaterials.
Trimmers with bearing top and bottom
Trimmers with bearing top and bottom
Rounding over cutter R4 S8mm
Rounding over cutter R4 S8mm