BI-METAL EasyXcut M3 hole...
Bi-metal M3 Hole Saws with vario-pitched teeth for...
Bi-metal M3 Hole Saws with vario-pitched teeth for applications where fast cutting and low price are the main challenges.
Filter By
Availability
Bore
Thickness
Shank
Diameter (D)
Cutting length/height:
Total Length
Radius / Angle
Cutters
There are 36 products.
Bi-metal M3 Hole Saws with vario-pitched teeth for...
Bi-metal M3 Hole Saws with vario-pitched teeth for applications where fast cutting and low price are the main challenges.
Straight bit shank 8mm
Straight bit shank 8mm
Dovetail bit HW Z=2 D=14 A=10° L=12 GL=49 S=8mm
Dovetail bit HW Z=2 D=14 A=10° L=12 GL=49 S=8mm
Suitable for: Steel, Stainless steel, Cast iron, Aluminum and...
Suitable for: Steel, Stainless steel, Cast iron, Aluminum and copper
Straight cutter with two flutes for clean finish. For...
Straight cutter with two flutes for clean finish. For grooving, rebating and mortising. With TC centre tip. The TC centre tip is ideal for plunging and working in abrasive materials such as chipboard, MDF, plywood and hardwood.
Dowel drill bit S10 mm Righthand rot.
Dowel drill bit S10 mm Righthand rot.
Straight bit shank 8mm
Straight bit shank 8mm
Straight bit shank 12 mm
Straight bit shank 12 mm
Miniature bevel cutter with bearing 45 degrees
Miniature bevel cutter with bearing 45 degrees
Straight bit shank 8mm
Straight bit shank 8mm
Straight bit shank 12 mm
Straight bit shank 12 mm
Straight bit shank 12 mm
Straight bit shank 12 mm
Titman rounding over cutter R3 S8
Titman rounding over cutter R3 S8
JVL STEAM circular saw blade 315mm x 32 x 2 Z200 - High speed...
JVL STEAM circular saw blade 315mm x 32 x 2 Z200 - High speed tungsten Molybdenum steel HSS DMo5 M2 - Steam threated. entry level blade - Suitable for manual and semi automatic cut off machines. - Holes (MX) 2/8/45 + 2/9/50 + 2/11/63
JVL STEAM Circular saw blade 315 x 32 x 2 Z120 T8 - High speed...
JVL STEAM Circular saw blade 315 x 32 x 2 Z120 T8 - High speed tungsten Molybdenum steel HSS DMo5 M2 - Steam threated. entry level blade - Suitable for manual and semi automatic cut off machines. - Holes (MX) 2/8/45 + 2/9/50 + 2/11/63
Replacement tip Straight bit Z=1 Shank 12 mm
Replacement tip Straight bit Z=1 Shank 12 mm
Replacement tip Straight bit Z=1 S=8
Replacement tip Straight bit Z=1 S=8
Replacement tip Straight bit Z=1 Shank M12x1
Replacement tip Straight bit Z=1 Shank M12x1
Replacement tip Straight bit Z=1 Shank 12 mm
Replacement tip Straight bit Z=1 Shank 12 mm
Spiral finishing cutter upcut Z3
Spiral finishing cutter upcut Z3
Spiral finishing cutter upcut Z2
Spiral finishing cutter upcut Z2
Replacement tip Straight bit Z=1 Shank M10x1.5
Replacement tip Straight bit Z=1 Shank M10x1.5
Replacement tip Straight bit Z=1 Shank M12x1
Replacement tip Straight bit Z=1 Shank M12x1
circular saw blade JVL OPTIMUS - Multi-layer AlTiCN coating...
circular saw blade JVL OPTIMUS - Multi-layer AlTiCN coating with a 3.0 µm thickness- Best coating for cutting all kinds of material- Top of the bill saw blade for heavy cutting conditions- Can be used with emulsion or spray cooling, for all metals (no blade change required)- Suitable for Flying...
circular saw blade JVL OPTIMUS - Multi-layer AlTiCN coating...
circular saw blade JVL OPTIMUS - Multi-layer AlTiCN coating with a 3.0 µm thickness- Best coating for cutting all kinds of material- Top of the bill saw blade for heavy cutting conditions- Can be used with emulsion or spray cooling, for all metals (no blade change required)- Suitable for Flying...
circular saw blade JVL OPTIMUS - Multi-layer AlTiCN coating...
circular saw blade JVL OPTIMUS - Multi-layer AlTiCN coating with a 3.0 µm thickness- Best coating for cutting all kinds of material- Top of the bill saw blade for heavy cutting conditions- Can be used with emulsion or spray cooling, for all metals (no blade change required)- Suitable for Flying...
circular saw blade JVL OPTIMUS - Multi-layer AlTiCN coating...
circular saw blade JVL OPTIMUS - Multi-layer AlTiCN coating with a 3.0 µm thickness- Best coating for cutting all kinds of material- Top of the bill saw blade for heavy cutting conditions- Can be used with emulsion or spray cooling, for all metals (no blade change required)- Suitable for Flying...
315 x2,5 x 32 Z160 Circular saw blade JVL OPTIMUS -...
315 x2,5 x 32 Z160 Circular saw blade JVL OPTIMUS - Multi-layer AlTiCN coating with a 3.0 µm thickness- Best coating for cutting all kinds of material- Top of the bill saw blade for heavy cutting conditions- Can be used with emulsion or spray cooling, for all metals (no blade change required)-...