Filter By
Availability
Shank
Diameter (D)
Cutting length/height:
Total Length
Radius / Angle
Cutters
Bi-metal M3 Hole Saws with vario-pitched teeth for...
Bi-metal M3 Hole Saws with vario-pitched teeth for applications where fast cutting and low price are the main challenges.
Bi-metal M3 Hole Saws with vario-pitched teeth for...
Bi-metal M3 Hole Saws with vario-pitched teeth for applications where fast cutting and low price are the main challenges.
Straight bit shank 8mm
Straight bit shank 8mm
Dovetail bit HW Z=2 D=14 A=10° L=12 GL=49 S=8mm
Dovetail bit HW Z=2 D=14 A=10° L=12 GL=49 S=8mm
Suitable for: Steel, Stainless steel, Cast iron, Aluminum and...
Suitable for: Steel, Stainless steel, Cast iron, Aluminum and copper
Straight cutter with two flutes for clean finish. For...
Straight cutter with two flutes for clean finish. For grooving, rebating and mortising. With TC centre tip. The TC centre tip is ideal for plunging and working in abrasive materials such as chipboard, MDF, plywood and hardwood.
Dowel drill bit S10 mm Righthand rot.
Dowel drill bit S10 mm Righthand rot.
Straight bit shank 8mm
Straight bit shank 8mm
Straight bit shank 12 mm
Straight bit shank 12 mm
Miniature bevel cutter with bearing 45 degrees
Miniature bevel cutter with bearing 45 degrees
Straight bit shank 8mm
Straight bit shank 8mm
Straight bit shank 12 mm
Straight bit shank 12 mm
For edging sinks and vanity bowls. The special taper on the...
For edging sinks and vanity bowls. The special taper on the Bearing sleeve allows for perfect guide following around the inside of the bowl.
Rebate cutter with bearing
Rebate cutter with bearing
Straight bit shank 12 mm
Straight bit shank 12 mm
Titman rounding over cutter R3 S8
Titman rounding over cutter R3 S8
Cove mould cutter for solid surface
Cove mould cutter for solid surface
Cove mould cutter with bearing
Cove mould cutter with bearing
Titman flute bit HW Z=2 D=32 R=12 L=20 GL=60 S=12
Titman flute bit HW Z=2 D=32 R=12 L=20 GL=60 S=12
Replacement tip Straight bit Z=1 Shank 12 mm
Replacement tip Straight bit Z=1 Shank 12 mm
Replacement tip Straight bit Z=1 S=8
Replacement tip Straight bit Z=1 S=8
Replacement tip Straight bit Z=1 Shank M12x1
Replacement tip Straight bit Z=1 Shank M12x1
Replacement tip Straight bit Z=1 Shank 12 mm
Replacement tip Straight bit Z=1 Shank 12 mm
