BI-METAL EasyXcut M3 hole...
Bi-metal M3 Hole Saws with vario-pitched teeth for...
Bi-metal M3 Hole Saws with vario-pitched teeth for applications where fast cutting and low price are the main challenges.
Filter By
Availability
Bore
Thickness
Shank
Diameter (D)
Cutting length/height:
Total Length
Radius / Angle
Cutters
There are 54 products.
Bi-metal M3 Hole Saws with vario-pitched teeth for...
Bi-metal M3 Hole Saws with vario-pitched teeth for applications where fast cutting and low price are the main challenges.
Groovers Z=2 d=6.35
Groovers Z=2 d=6.35
Groovers Z=2 d=6.35
Groovers Z=2 d=6.35
Hinge boring bit with centre point and two bevelled flutes....
Hinge boring bit with centre point and two bevelled flutes. Because of their specially designed cutting edges they allow use on high speed machines up to 27000 rpm. Shank without flat for use on routing machines.
Groovers Z=2 d=6.35
Groovers Z=2 d=6.35
Groovers Z=2 d=6.35
Groovers Z=2 d=6.35
Groovers Z=2 d=6.35
Groovers Z=2 d=6.35
Specifically designed for cutting in hinges. stair treads and...
Specifically designed for cutting in hinges. stair treads and the general routing of larger flat bottom areas
V-Groove cutter 135° S8mm for ALUCOBOND, DiBOND, REYNOBOND
V-Groove cutter 135° S8mm for ALUCOBOND, DiBOND, REYNOBOND
Side slotting cutter Shank 12 mm
Side slotting cutter Shank 12 mm
Side slotting cutter Shank 8 mm
Side slotting cutter Shank 8 mm
Side slotting cutter Shank 12 mm
Side slotting cutter Shank 12 mm
Side slotting cutter Shank 8 mm
Side slotting cutter Shank 8 mm
Side slotting cutter Shank 12 mm
Side slotting cutter Shank 12 mm
Side slotting cutter Shank 8 mm
Side slotting cutter Shank 8 mm
Side slotting cutter Shank 12 mm
Side slotting cutter Shank 12 mm
Side slotting cutter Shank 8 mm
Side slotting cutter Shank 8 mm
Rounding over cutter with bearing for solid surface materials
Rounding over cutter with bearing for solid surface materials
Bevel cutter with real center cutting edge for direct...
Bevel cutter with real center cutting edge for direct immersion in the material. For foldingand chamfering wood, laminate and plastic sheets.
Titman flute bit R=3 S=8
Titman flute bit R=3 S=8
ENT 16430 Glue joint cutter TC for wood thicknesses from 15 to...
ENT 16430 Glue joint cutter TC for wood thicknesses from 15 to max. 25 mm. with 8 mm shank.
Side slotting cutter Shank 8 mm
Side slotting cutter Shank 8 mm
Bevel cutter S=8 with high diameter
Bevel cutter S=8 with high diameter
V-Groove cutter for solid surface
V-Groove cutter for solid surface
Titman flute bit R=4 S=8
Titman flute bit R=4 S=8