Home

Suitable for: aluminum, copper, plastics

Suitable for: aluminum, copper, plastics

Suitable for: Steel, Stainless steel, Cast iron, aluminum,...

Suitable for: Steel, Stainless steel, Cast iron, aluminum, copper and plastics

Suitable for: Steel, Stainless steel, Cast iron, aluminum,...

Suitable for: Steel, Stainless steel, Cast iron, aluminum, copper and plastics

Suitable for: Steel, Stainless steel, Cast iron, aluminum,...

Suitable for: Steel, Stainless steel, Cast iron, aluminum, copper and plastics

Suitable for: Steel, Stainless steel, Cast iron, Aluminum and...

Suitable for: Steel, Stainless steel, Cast iron, Aluminum and copper

Suitable for: Steel, Stainless steel, Cast iron, Aluminum and...

Suitable for: Steel, Stainless steel, Cast iron, Aluminum and copper

Knife in HW 16x16.5x2 R=1.5 3402A0086 for Biesse

Knife in HW 16x16.5x2 R=1.5 3402A0086 for Biesse

Knife in HW R=1.5 N3402N0124

Knife in HW R=1.5 N3402N0124

Knife in HW R=1 N3402N0123

Knife in HW R=1 N3402N0123

Knife in HW 16.5x16x2 R=1 CCEN700013

Knife in HW 16.5x16x2 R=1 CCEN700013

Knife in HW 16.5x16x2 R=1.5 CCEN700012

Knife in HW 16.5x16x2 R=1.5 CCEN700012

Knife in HW R=1/2/25 degrees CSEN700026

Knife in HW R=1/2/25 degrees CSEN700026

Knife in HW R=1/2/25 degrees CSEN700025

Knife in HW R=1/2/25 degrees CSEN700025

Rounding over cutter with extended and tapering cutting edges....

Rounding over cutter with extended and tapering cutting edges. This prevents adhesive residues from getting stuck between the cutting edges and the thrust bearing and causing excessive temperatures.

Rounding over cutter with extended and tapering cutting edges....

Rounding over cutter with extended and tapering cutting edges. This prevents adhesive residues from getting stuck between the cutting edges and the thrust bearing and causing excessive temperatures.

Face milling cutter for solid surface

Face milling cutter for solid surface

Finger pull Cutters D=22 R1=3 R2=1 S=12mm FPC22-12

Finger pull Cutters D=22 R1=3 R2=1 S=12mm FPC22-12

Rounding cutter with interchangeable knives 60/70X16X16+2KN...

Rounding cutter with interchangeable knives 60/70X16X16+2KN R=1 CCW 3401A0356

Rounding cutter with interchangeable knives 60/70X16X16+2KN R1...

Rounding cutter with interchangeable knives 60/70X16X16+2KN R1 CW   3401A0355

Rounding cutter with interchangeable knives 60/70X16X16+2KN...

Rounding cutter with interchangeable knives 60/70X16X16+2KN R=1.5 CCW 3401A0354

Rounding cutter with interchangeable knives 60/70X16X16+2KN...

Rounding cutter with interchangeable knives 60/70X16X16+2KN R1.5 CW   3401A0353 AR02-E

Tilted fine trimmer 75x25x16+2KN R1.5/2/3/25° CCW N3401N0392

Tilted fine trimmer 75x25x16+2KN R1.5/2/3/25° CCW N3401N0392

Tilted fine trimmer 75x25x16+2KN R=1/1,5/2/25 degrees CCW...

Tilted fine trimmer 75x25x16+2KN R=1/1,5/2/25 degrees CCW N3401N0396

Tilted fine trimmer 75x25x16+2KN R=1/1,5/2/25 degrees CW...

Tilted fine trimmer 75x25x16+2KN R=1/1,5/2/25 degrees CW N3401N0395

Tilted fine trimmer 75x25x16+2KN R=1/2/3/25 degrees CCW...

Tilted fine trimmer 75x25x16+2KN R=1/2/3/25 degrees CCW N3401N0394

Tilted fine trimmer 75x25x16+2KN R=1/2/3/25 degrees CW N3401N0393

Tilted fine trimmer 75x25x16+2KN R=1/2/3/25 degrees CW N3401N0393