Home

Suitable for: Steel, Stainless steel, Cast iron, aluminum,...

Suitable for: Steel, Stainless steel, Cast iron, aluminum, copper and plastics

JVL Chamfer bit 38.1 mm  45° with 8mm shank

JVL Chamfer bit 38.1 mm  45° with 8mm shank

Suitable for: Steel, Stainless steel, Cast iron, Aluminum and...

Suitable for: Steel, Stainless steel, Cast iron, Aluminum and copper

Knife in HW R=1 N3402N0123

Knife in HW R=1 N3402N0123

Bevel cutter for folding and chamfering wood, laminate and...

Bevel cutter for folding and chamfering wood, laminate and plastic sheets.

V-Groove cutter

V-Groove cutter

V-Groove cutter

V-Groove cutter

V-Groove cutter

V-Groove cutter

Knife in HW R=1/2/25 degrees CSEN700026

Knife in HW R=1/2/25 degrees CSEN700026

Knife in HW R=1/2/25 degrees CSEN700025

Knife in HW R=1/2/25 degrees CSEN700025

For use on twist drills with a 10 mm shank and a diameter of 4...

For use on twist drills with a 10 mm shank and a diameter of 4 mm to 10 mm.The countersinkis guided to the shank via the drill spiral and fastened there.

For use on twist drills with a 10 mm shank and a diameter of 4...

For use on twist drills with a 10 mm shank and a diameter of 4 mm to 10 mm.The countersinkis guided to the shank via the drill spiral and fastened there.

ENT 13821 Chamfer cutter 45 degrees with ball bearing and 8...

ENT 13821 Chamfer cutter 45 degrees with ball bearing and 8 mm shank

ENT 13801 Chamfer cutter 45 degrees with ball bearing and 6...

ENT 13801 Chamfer cutter 45 degrees with ball bearing and 6 mm shank

Miniature bevel cutter with bearing 45 degrees

Miniature bevel cutter with bearing 45 degrees

For chamfering thin sheets, plywood, acrylic, etc. For...

For chamfering thin sheets, plywood, acrylic, etc. For interior and exterior contours.

Miniature bevel cutter with bearing 45 degrees

Miniature bevel cutter with bearing 45 degrees

Miniature bevel cutter with bearing 45 degrees

Miniature bevel cutter with bearing 45 degrees

For chamfering thin sheets, plywood, acrylic, etc. For...

For chamfering thin sheets, plywood, acrylic, etc. For interior and exterior contours.

Rounding over cutter with extended and tapering cutting edges....

Rounding over cutter with extended and tapering cutting edges. This prevents adhesive residues from getting stuck between the cutting edges and the thrust bearing and causing excessive temperatures.

Rounding over cutter with extended and tapering cutting edges....

Rounding over cutter with extended and tapering cutting edges. This prevents adhesive residues from getting stuck between the cutting edges and the thrust bearing and causing excessive temperatures.

Bevel cutter heavy duty

Bevel cutter heavy duty

V-Groove cutter

V-Groove cutter

Bevel cutter with bearing

Bevel cutter with bearing

Bevel cutter with bearing

Bevel cutter with bearing

Double chamfering bit HW Z=2+2 A=45 degrees L=15 S=6

Double chamfering bit HW Z=2+2 A=45 degrees L=15 S=6

Bevel cutter with real center cutting edge for direct...

Bevel cutter with real center cutting edge for direct immersion in the material. For foldingand chamfering wood, laminate and plastic sheets.