BT4 2,0x40
Suitable for: Steel, Stainless steel, Cast iron, aluminum,...
Suitable for: Steel, Stainless steel, Cast iron, aluminum, copper and plastics
Filter By
Availability
Bore
Shank
Diameter (D)
Cutting length/height:
Total Length
Radius / Angle
Cutters
There are 42 products.
Suitable for: Steel, Stainless steel, Cast iron, aluminum,...
Suitable for: Steel, Stainless steel, Cast iron, aluminum, copper and plastics
Suitable for: Steel, Stainless steel, Cast iron, Aluminum and...
Suitable for: Steel, Stainless steel, Cast iron, Aluminum and copper
Suitable for: aluminum, copper, plastics
Suitable for: aluminum, copper, plastics
Suitable for: Steel, Stainless steel, Cast iron, aluminum,...
Suitable for: Steel, Stainless steel, Cast iron, aluminum, copper and plastics
Knife in HW R=1 N3402N0123
Knife in HW R=1 N3402N0123
Knife in HW R=1/2/25 degrees CSEN700026
Knife in HW R=1/2/25 degrees CSEN700026
Knife in HW R=1/2/25 degrees CSEN700025
Knife in HW R=1/2/25 degrees CSEN700025
Rounding over cutter with extended and tapering cutting edges....
Rounding over cutter with extended and tapering cutting edges. This prevents adhesive residues from getting stuck between the cutting edges and the thrust bearing and causing excessive temperatures.
Rounding over cutter with extended and tapering cutting edges....
Rounding over cutter with extended and tapering cutting edges. This prevents adhesive residues from getting stuck between the cutting edges and the thrust bearing and causing excessive temperatures.
Premium Half round cutter
Premium Half round cutter
Premium Half round cutter
Premium Half round cutter
Guttering cutter for solid surface
Guttering cutter for solid surface
Diamond PCD rounding over bit Shank 8 mm
Diamond PCD rounding over bit Shank 8 mm
Guttering cutter with high cutting length 12 mm Shank
Guttering cutter with high cutting length 12 mm Shank
Ball nose Spiral cutter Z1 Positive - Upcut for Plastics...
Ball nose Spiral cutter Z1 Positive - Upcut for Plastics Suitable for: Acrylonitrile butadiene styrene (ABS) Polycarbonate Polyethylene Polypropylene Polystyrene Polyvinyl chloride (PVC) Polymethyl methacrylate (Acrylic. Plexi etc.)
Finger pull Cutters D=22 R1=3 R2=1 S=12mm FPC22-12
Finger pull Cutters D=22 R1=3 R2=1 S=12mm FPC22-12
Ball nose Spiral cutter Z1 Positive - Upcut for Plastics...
Ball nose Spiral cutter Z1 Positive - Upcut for Plastics Suitable for: Acrylonitrile butadiene styrene (ABS) Polycarbonate Polyethylene Polypropylene Polystyrene Polyvinyl chloride (PVC) Polymethyl methacrylate (Acrylic. Plexi etc.)
Rounding cutter with interchangeable knives 60/70X16X16+2KN...
Rounding cutter with interchangeable knives 60/70X16X16+2KN R=1 CCW 3401A0356
Tilted fine trimmer 75x25x16+2KN R=1/1,5/2/25 degrees CCW...
Tilted fine trimmer 75x25x16+2KN R=1/1,5/2/25 degrees CCW N3401N0396
Tilted fine trimmer 75x25x16+2KN R=1/1,5/2/25 degrees CW...
Tilted fine trimmer 75x25x16+2KN R=1/1,5/2/25 degrees CW N3401N0395
Tilted fine trimmer 75x25x16+2KN R=1/2/3/25 degrees CCW...
Tilted fine trimmer 75x25x16+2KN R=1/2/3/25 degrees CCW N3401N0394
Tilted fine trimmer 75x25x16+2KN R=1/2/3/25 degrees CW N3401N0393
Tilted fine trimmer 75x25x16+2KN R=1/2/3/25 degrees CW N3401N0393
This set was designed to produce a variety of concave and...
This set was designed to produce a variety of concave and convex rounds.It consists of a light alloy cutterhead with two R 4 mm knives mounted on the tool and four spare R 6 and R 8 mm knives.
Tilted trimmer with interchangeable knives 75x20x16+2KN R=1...
Tilted trimmer with interchangeable knives 75x20x16+2KN R=1 N3401N0431