Home

Roundnose bit R=3,2 mm S=8mm

Roundnose bit R=3,2 mm S=8mm

Solid carbide milling cutters for plastic processing,...

Solid carbide milling cutters for plastic processing, particularly suitable for acrylic. The spiral cuts result in virtually no heat development and the cutting pressure is very low. Cutting on the diameter with ground cut. Clockwise rotation

Solid carbide milling cutters for plastic processing,...

Solid carbide milling cutters for plastic processing, particularly suitable for acrylic. The spiral cuts result in virtually no heat development and the cutting pressure is very low. Cutting on the diameter with ground cut. Clockwise rotation

Solid carbide milling cutters for plastic processing,...

Solid carbide milling cutters for plastic processing, particularly suitable for acrylic. The spiral cuts result in virtually no heat development and the cutting pressure is very low. Cutting on the diameter with ground cut. Clockwise rotation

Solid carbide milling cutters for plastic processing,...

Solid carbide milling cutters for plastic processing, particularly suitable for acrylic. The spiral cuts result in virtually no heat development and the cutting pressure is very low. Cutting on the diameter with ground cut. Clockwise rotation

Solid carbide milling cutters for plastic processing,...

Solid carbide milling cutters for plastic processing, particularly suitable for acrylic. The spiral cuts result in virtually no heat development and the cutting pressure is very low. Cutting on the diameter with ground cut. Clockwise rotation

Twist drill continuously cylindrical

Twist drill continuously cylindrical

Single flute cutter with neck for plastic and aluminium

Single flute cutter with neck for plastic and aluminium

Arbor with cylindrical shank 12 mm including spacers and...

Arbor with cylindrical shank 12 mm including spacers and clamping nut.

Dowel drill bit  S10 mm Lefthand rot.

Dowel drill bit  S10 mm Lefthand rot.

Dowel drill bit  S10 mm Lefthand rot.

Dowel drill bit  S10 mm Lefthand rot.

Dowel drill bit  L70  S10 mm Righthand rot.

Dowel drill bit  L70  S10 mm Righthand rot.

Dowel drill bit  L70  S10 mm Righthand rot.

Dowel drill bit  L70  S10 mm Righthand rot.

Dowel drill bit  S10 mm Lefthand rot.

Dowel drill bit  S10 mm Lefthand rot.

Dowel drill bit  L70  S10 mm Righthand rot.

Dowel drill bit  L70  S10 mm Righthand rot.

Dowel drill bit  S10 mm Lefthand rot.

Dowel drill bit  S10 mm Lefthand rot.

Dowel drill bit  L70  S10 mm Righthand rot.

Dowel drill bit  L70  S10 mm Righthand rot.

Dowel drill bit  S10 mm Lefthand rot.

Dowel drill bit  S10 mm Lefthand rot.

Dowel drill bit  L70  S10 mm Righthand rot.

Dowel drill bit  L70  S10 mm Righthand rot.

Bearing guide trimmer Z2 for solid surface Suitable for...

Bearing guide trimmer Z2 for solid surface Suitable for Corian Hi-Macs Staron Avonite Hanex Varicor domovari

Bevel cutter for solid surface

Bevel cutter for solid surface

Straight bit shank 12 mm

Straight bit shank 12 mm

Straight bit shank 12 mm

Straight bit shank 12 mm

Straight bit shank 12 mm

Straight bit shank 12 mm

PCD Diamond straight router bit bottom cutting

PCD Diamond straight router bit bottom cutting

PCD Diamond straight router bit bottom cutting

PCD Diamond straight router bit bottom cutting