Keyhole bit HW D9.5 S8
Keyhole bit HW Z=1 D=9.5 C=10 L=4.5 d=4.5 S=8
Keyhole bit HW Z=1 D=9.5 C=10 L=4.5 d=4.5 S=8
- -10%
- -10%
Filter By
Availability
Shank
Diameter (D)
Cutting length/height:
Total Length
Radius / Angle
Cutters
There are 37 products.
Keyhole bit HW Z=1 D=9.5 C=10 L=4.5 d=4.5 S=8
Keyhole bit HW Z=1 D=9.5 C=10 L=4.5 d=4.5 S=8
Dowel drill bit S10 mm Lefthand rot.
Dowel drill bit S10 mm Lefthand rot.
Dowel drill bit S10 mm Lefthand rot.
Dowel drill bit S10 mm Lefthand rot.
Dowel drill bit L105 S10 mm Righthand rot.
Dowel drill bit L105 S10 mm Righthand rot.
Dowel drill bit L105 S10 mm Righthand rot.
Dowel drill bit L105 S10 mm Righthand rot.
Keyhole bit HW Z=1 D=9.5 C=10 L=4.5 d=4.5 S=6mm
Keyhole bit HW Z=1 D=9.5 C=10 L=4.5 d=4.5 S=6mm
Single flute cutter Z=2 Negative for solid surface
Single flute cutter Z=2 Negative for solid surface
Keyhole bit HW D=12,7 mm S=8
Keyhole bit HW D=12,7 mm S=8
Dowel drill bit S10 mm Lefthand rot.
Dowel drill bit S10 mm Lefthand rot.
Dowel drill bit L105 S10 mm Righthand rot.
Dowel drill bit L105 S10 mm Righthand rot.
Single flute cutter Z=2 Negative for solid surface
Single flute cutter Z=2 Negative for solid surface
Dowel drill bit S10 mm Lefthand rot.
Dowel drill bit S10 mm Lefthand rot.
Dowel drill bit L105 S10 mm Righthand rot.
Dowel drill bit L105 S10 mm Righthand rot.
Dowel drill bit S10 mm Lefthand rot.
Dowel drill bit S10 mm Lefthand rot.
Dowel drill bit L105 S10 mm Righthand rot.
Dowel drill bit L105 S10 mm Righthand rot.
Ballbearings diameter 16 mm and 12,7 mm included.
Ballbearings diameter 16 mm and 12,7 mm included.
Rounding over cutter with extended and tapering cutting edges....
Rounding over cutter with extended and tapering cutting edges. This prevents adhesive residues from getting stuck between the cutting edges and the thrust bearing and causing excessive temperatures.
Rounding over cutter with extended and tapering cutting edges....
Rounding over cutter with extended and tapering cutting edges. This prevents adhesive residues from getting stuck between the cutting edges and the thrust bearing and causing excessive temperatures.
Rounding over cutter with extended and tapering cutting edges....
Rounding over cutter with extended and tapering cutting edges. This prevents adhesive residues from getting stuck between the cutting edges and the thrust bearing and causing excessive temperatures.
Titman rounding cutter D=16,3 L=9 R=4 d=6,35 S=8
Titman rounding cutter D=16,3 L=9 R=4 d=6,35 S=8
Replacement tip bearing guide cutter. For coated boards, solid...
Replacement tip bearing guide cutter. For coated boards, solid wood and wood-basedmaterials
Ballbearings diameter 16 mm and 12,7 mm included.
Ballbearings diameter 16 mm and 12,7 mm included.