Home

Twist drill continuously cylindrical

Twist drill continuously cylindrical

Single flute cutter with neck for plastic and aluminium

Single flute cutter with neck for plastic and aluminium

Keyhole bit HW Z=1 D=9.5 C=10 L=4.5 d=4.5 S=8

Keyhole bit HW Z=1 D=9.5 C=10 L=4.5 d=4.5 S=8

Arbor with cylindrical shank 12 mm including spacers and...

Arbor with cylindrical shank 12 mm including spacers and clamping nut.

Dowel drill bit  S10 mm Lefthand rot.

Dowel drill bit  S10 mm Lefthand rot.

Dowel drill bit  S10 mm Lefthand rot.

Dowel drill bit  S10 mm Lefthand rot.

Dowel drill bit  L70  S10 mm Righthand rot.

Dowel drill bit  L70  S10 mm Righthand rot.

Dowel drill bit  L70  S10 mm Righthand rot.

Dowel drill bit  L70  S10 mm Righthand rot.

Dowel drill bit  S10 mm Lefthand rot.

Dowel drill bit  S10 mm Lefthand rot.

Dowel drill bit  L70  S10 mm Righthand rot.

Dowel drill bit  L70  S10 mm Righthand rot.

Dowel drill bit  S10 mm Lefthand rot.

Dowel drill bit  S10 mm Lefthand rot.

Dowel drill bit  L70  S10 mm Righthand rot.

Dowel drill bit  L70  S10 mm Righthand rot.

Keyhole bit HW Z=1 D=9.5 C=10 L=4.5 d=4.5 S=6mm

Keyhole bit HW Z=1 D=9.5 C=10 L=4.5 d=4.5 S=6mm

Keyhole bit HW D=12,7 mm S=8

Keyhole bit HW D=12,7 mm S=8

Dowel drill bit  S10 mm Lefthand rot.

Dowel drill bit  S10 mm Lefthand rot.

Dowel drill bit  L70  S10 mm Righthand rot.

Dowel drill bit  L70  S10 mm Righthand rot.

Bearing guide trimmer Z2 for solid surface Suitable for...

Bearing guide trimmer Z2 for solid surface Suitable for Corian Hi-Macs Staron Avonite Hanex Varicor domovari

Bevel cutter for solid surface

Bevel cutter for solid surface

Straight bit shank 12 mm

Straight bit shank 12 mm

Ballbearings diameter 16 mm and 12,7 mm included.

Ballbearings diameter 16 mm and 12,7 mm included.

Rounding over cutter with extended and tapering cutting edges....

Rounding over cutter with extended and tapering cutting edges. This prevents adhesive residues from getting stuck between the cutting edges and the thrust bearing and causing excessive temperatures.

Rounding over cutter with extended and tapering cutting edges....

Rounding over cutter with extended and tapering cutting edges. This prevents adhesive residues from getting stuck between the cutting edges and the thrust bearing and causing excessive temperatures.

Rounding over cutter with extended and tapering cutting edges....

Rounding over cutter with extended and tapering cutting edges. This prevents adhesive residues from getting stuck between the cutting edges and the thrust bearing and causing excessive temperatures.

Straight bit shank 12 mm

Straight bit shank 12 mm