Reduction sleeve 10-12 MM
Reduction sleeve 10-12mm
Reduction sleeve 10-12mm
- -10%
- -10%
Filter By
Availability
inner diameter
Outside diameter
Shank
Diameter (D)
Cutting length/height:
Total Length
Radius / Angle
Cutters
There are 47 products.
Reduction sleeve 10-12mm
Reduction sleeve 10-12mm
Reduction sleeve 8-12 mm
Reduction sleeve 8-12 mm
Reduction sleeve 8 - 10 mm
Reduction sleeve 8 - 10 mm
Reduction sleeve 6 - 12 mm
Reduction sleeve 6 - 12 mm
Reduction sleeve 6 -10 mm
Reduction sleeve 6 -10 mm
Reduction sleeve 6 - 8mm
Reduction sleeve 6 - 8mm
ENT Straight Cutter TC / One Flute with 8 mm shank
ENT Straight Cutter TC / One Flute with 8 mm shank
For drill bits with 10 mm shank and clamping surface. Suitable...
For drill bits with 10 mm shank and clamping surface. Suitable for machines from: Albert, SCM, Schleicher, Vitap, Balestrini, Ombe, Bilek S = M10x1,5 mmD = 19 mmA = 15°L = 20 mmGL = 46 mm
For drill bits with 10 mm shank and clamping surface. Suitable...
For drill bits with 10 mm shank and clamping surface. Suitable for machines from: Albert, SCM, Schleicher, Vitap, Balestrini, Ombe, Bilek S = M10x1,5 mmD = 19 mmA = 15°L = 20 mmGL = 46 mm
Spiral cutter Z1 Negative - Down cut for Plastics Suitable...
Spiral cutter Z1 Negative - Down cut for Plastics Suitable for: Acrylonitrile butadiene styrene (ABS) Polycarbonate Polyethylene Polypropylene Polystyrene Polyvinyl chloride (PVC) Polymethyl methacrylate (Acrylic. Plexi etc.)
Spiral cutter Z1 Negative - Down cut for Plastics Suitable...
Spiral cutter Z1 Negative - Down cut for Plastics Suitable for: Acrylonitrile butadiene styrene (ABS) Polycarbonate Polyethylene Polypropylene Polystyrene Polyvinyl chloride (PVC) Polymethyl methacrylate (Acrylic. Plexi etc.)
Spiral cutter Z1 Positive - Upcut for Plastics Suitable for:...
Spiral cutter Z1 Positive - Upcut for Plastics Suitable for: Acrylonitrile butadiene styrene (ABS) Polycarbonate Polyethylene Polypropylene Polystyrene Polyvinyl chloride (PVC) Polymethyl methacrylate (Acrylic. Plexi etc.)
Spiral cutter Z1 Positive - Upcut for Plastics Suitable for:...
Spiral cutter Z1 Positive - Upcut for Plastics Suitable for: Acrylonitrile butadiene styrene (ABS) Polycarbonate Polyethylene Polypropylene Polystyrene Polyvinyl chloride (PVC) Polymethyl methacrylate (Acrylic. Plexi etc.)
Spiral cutter Z1 Positive - Upcut for Plastics Suitable for:...
Spiral cutter Z1 Positive - Upcut for Plastics Suitable for: Acrylonitrile butadiene styrene (ABS) Polycarbonate Polyethylene Polypropylene Polystyrene Polyvinyl chloride (PVC) Polymethyl methacrylate (Acrylic. Plexi etc.)
Spiral cutter Z1 Negative - Down cut for Plastics Suitable...
Spiral cutter Z1 Negative - Down cut for Plastics Suitable for: Acrylonitrile butadiene styrene (ABS) Polycarbonate Polyethylene Polypropylene Polystyrene Polyvinyl chloride (PVC) Polymethyl methacrylate (Acrylic. Plexi etc.)
Spiral cutter Z1 Positive - Upcut for Plastics Suitable for:...
Spiral cutter Z1 Positive - Upcut for Plastics Suitable for: Acrylonitrile butadiene styrene (ABS) Polycarbonate Polyethylene Polypropylene Polystyrene Polyvinyl chloride (PVC) Polymethyl methacrylate (Acrylic. Plexi etc.)
Straight bit shank 8mm
Straight bit shank 8mm
Straight bit shank 6 mm
Straight bit shank 6 mm
Straight bit shank 8mm
Straight bit shank 8mm
Straight bit shank 6 mm
Straight bit shank 6 mm
Dovetail bit Z=2 D=10 A=10° L=9 GL=45 S=8
Dovetail bit Z=2 D=10 A=10° L=9 GL=45 S=8
Dovetail bit HW Z=2 D=12 A=10° L=10 GL=46 S=8
Dovetail bit HW Z=2 D=12 A=10° L=10 GL=46 S=8
This results in a particularly clean result with thin coatings...
This results in a particularly clean result with thin coatings and long-fiber funnels.
This results in a particularly clean result with thin coatings...
This results in a particularly clean result with thin coatings and long-fiber funnels.
Trimmers with bearing
Trimmers with bearing
Trimmers with bearing
Trimmers with bearing
Radius engraving cutter These double-edged cutters create a...
Radius engraving cutter These double-edged cutters create a flat of approx. 1 mm at the bottom.
Radius engraving cutter These double-edged cutters create a...
Radius engraving cutter These double-edged cutters create a flat of approx. 1 mm at the bottom.