JVL pro-line rounding over...
JVL pro-line rounding over bit 31.8mm
JVL pro-line rounding over bit 31.8mm
Filter By
Availability
Shank
Diameter (D)
Cutting length/height:
Total Length
Radius / Angle
Cutters
There are 44 products.
Active filters
JVL pro-line rounding over bit 31.8mm
JVL pro-line rounding over bit 31.8mm
ENT Straight Cutter TC / One Flute with 8 mm shank
ENT Straight Cutter TC / One Flute with 8 mm shank
ENT Straight Cutter TC / One Flute with 8 mm shank
ENT Straight Cutter TC / One Flute with 8 mm shank
For drill bits with 10 mm shank and clamping surface. Suitable...
For drill bits with 10 mm shank and clamping surface. Suitable for machines from: Morbidelli, Biesse, Weeke, Reimall, Torwegge, Busellato, Bottcher, Gessner, Ayen S = M10x1,5 mmD = 19 mmL = 31 mmGL = 47 mm
For drill bits with 10 mm shank and clamping surface. Suitable...
For drill bits with 10 mm shank and clamping surface. Suitable for machines from: Morbidelli, Biesse, Weeke, Reimall, Torwegge, Busellato, Bottcher, Gessner, Ayen S = M10x1,5 mmD = 19 mmL = 31 mmGL = 47 mm
EPROCUT Flush trim bit HW Z=2 D=12,7 L=16 GL=48 S=8
EPROCUT Flush trim bit HW Z=2 D=12,7 L=16 GL=48 S=8
Straight bit shank 6 mm
Straight bit shank 6 mm
Bearing guide cutter for trimming protruding veneer and...
Bearing guide cutter for trimming protruding veneer and plastic edges. Also possible tocopy using a template. The small diameters are ideal for processing inside corners.
Trimmers with bearing
Trimmers with bearing
For chamfering thin sheets, plywood, acrylic, etc. For...
For chamfering thin sheets, plywood, acrylic, etc. For interior and exterior contours.
Side slotting cutter Shank 12 mm
Side slotting cutter Shank 12 mm
Side slotting cutter Shank 8 mm
Side slotting cutter Shank 8 mm
Side slotting cutter Shank 12 mm
Side slotting cutter Shank 12 mm
Side slotting cutter Shank 8 mm
Side slotting cutter Shank 8 mm
Side slotting cutter Shank 12 mm
Side slotting cutter Shank 12 mm
Side slotting cutter Shank 12 mm
Side slotting cutter Shank 12 mm
Rounding over cutter with extended and tapering cutting edges....
Rounding over cutter with extended and tapering cutting edges. This prevents adhesive residues from getting stuck between the cutting edges and the thrust bearing and causing excessive temperatures.
Rounding over cutter with extended and tapering cutting edges....
Rounding over cutter with extended and tapering cutting edges. This prevents adhesive residues from getting stuck between the cutting edges and the thrust bearing and causing excessive temperatures.
Rounding over cutter with extended and tapering cutting edges....
Rounding over cutter with extended and tapering cutting edges. This prevents adhesive residues from getting stuck between the cutting edges and the thrust bearing and causing excessive temperatures.
Rounding over cutter with extended and tapering cutting edges....
Rounding over cutter with extended and tapering cutting edges. This prevents adhesive residues from getting stuck between the cutting edges and the thrust bearing and causing excessive temperatures.
Rounding over cutter with extended and tapering cutting edges....
Rounding over cutter with extended and tapering cutting edges. This prevents adhesive residues from getting stuck between the cutting edges and the thrust bearing and causing excessive temperatures.
Rounding over cutter with extended and tapering cutting edges....
Rounding over cutter with extended and tapering cutting edges. This prevents adhesive residues from getting stuck between the cutting edges and the thrust bearing and causing excessive temperatures.
Rounding over cutter R8 S8mm
Rounding over cutter R8 S8mm