Home

JVL pro-line rounding over bit 31.8mm

JVL pro-line rounding over bit 31.8mm

Solid carbide milling cutters for plastic processing,...

Solid carbide milling cutters for plastic processing, particularly suitable for acrylic. The spiral cuts result in virtually no heat development and the cutting pressure is very low. Cutting on the diameter with ground cut. Clockwise rotation

ENT Straight Cutter TC / One Flute with 8 mm shank

ENT Straight Cutter TC / One Flute with 8 mm shank

ENT Straight Cutter TC / One Flute with 8 mm shank

ENT Straight Cutter TC / One Flute with 8 mm shank

For drill bits with 10 mm shank and clamping surface. Suitable...

For drill bits with 10 mm shank and clamping surface. Suitable for machines from: Morbidelli, Biesse, Weeke, Reimall, Torwegge, Busellato, Bottcher, Gessner, Ayen S = M10x1,5 mmD = 19 mmL = 31 mmGL = 47 mm

For drill bits with 10 mm shank and clamping surface. Suitable...

For drill bits with 10 mm shank and clamping surface. Suitable for machines from: Morbidelli, Biesse, Weeke, Reimall, Torwegge, Busellato, Bottcher, Gessner, Ayen S = M10x1,5 mmD = 19 mmL = 31 mmGL = 47 mm

EPROCUT Flush trim bit HW Z=2 D=12,7 L=16 GL=48 S=8

EPROCUT Flush trim bit HW Z=2 D=12,7 L=16 GL=48 S=8

Solid carbide milling cutters for plastic processing,...

Solid carbide milling cutters for plastic processing, particularly suitable for acrylic. The spiral cuts result in virtually no heat development and the cutting pressure is very low. Cutting on the diameter with ground cut. Clockwise rotation

ENT trimming cutter TC12.7 x 25.4 x 68 mm with 6 mm shank

ENT trimming cutter TC12.7 x 25.4 x 68 mm with 6 mm shank

ENT trimming cutter TC 12.7 x 25.4 x 68 mm with 8mm shank

ENT trimming cutter TC 12.7 x 25.4 x 68 mm with 8mm shank

ENT trimming cutter TC 9.5 x 25.4 x 68 mm with 8mm shank

ENT trimming cutter TC 9.5 x 25.4 x 68 mm with 8mm shank

Straight bit shank 6 mm

Straight bit shank 6 mm

Straight bit shank 12 mm

Straight bit shank 12 mm

Guttering cutter

Guttering cutter

Guttering cutter

Guttering cutter

Straight bit shank 12 mm

Straight bit shank 12 mm

Bearing guide cutter for trimming protruding veneer and...

Bearing guide cutter for trimming protruding veneer and plastic edges. Also possible tocopy using a template. The small diameters are ideal for processing inside corners.

Trimmers with bearing

Trimmers with bearing

Guttering cutter

Guttering cutter

Guttering cutter

Guttering cutter

For chamfering thin sheets, plywood, acrylic, etc. For...

For chamfering thin sheets, plywood, acrylic, etc. For interior and exterior contours.

Side slotting cutter Shank 12 mm

Side slotting cutter Shank 12 mm

Side slotting cutter Shank 8 mm

Side slotting cutter Shank 8 mm

Side slotting cutter Shank 12 mm

Side slotting cutter Shank 12 mm

Side slotting cutter Shank 8 mm

Side slotting cutter Shank 8 mm

Side slotting cutter Shank 12 mm

Side slotting cutter Shank 12 mm

Side slotting cutter Shank 12 mm

Side slotting cutter Shank 12 mm

Rounding over cutter with extended and tapering cutting edges....

Rounding over cutter with extended and tapering cutting edges. This prevents adhesive residues from getting stuck between the cutting edges and the thrust bearing and causing excessive temperatures.

Rounding over cutter with extended and tapering cutting edges....

Rounding over cutter with extended and tapering cutting edges. This prevents adhesive residues from getting stuck between the cutting edges and the thrust bearing and causing excessive temperatures.

Rounding over cutter with extended and tapering cutting edges....

Rounding over cutter with extended and tapering cutting edges. This prevents adhesive residues from getting stuck between the cutting edges and the thrust bearing and causing excessive temperatures.