Home

Suitable for: Steel, Stainless steel and copper

Suitable for: Steel, Stainless steel and copper

Suitable for: aluminum, copper, plastics

Suitable for: aluminum, copper, plastics

Suitable for: Steel, Stainless steel and copper

Suitable for: Steel, Stainless steel and copper

Suitable for: aluminum, copper, plastics

Suitable for: aluminum, copper, plastics

Diameter 31.8mm R 9.5mm

Diameter 31.8mm R 9.5mm

JVL Rounding over router bit R 7.9 mm with 8mm shank

JVL Rounding over router bit R 7.9 mm with 8mm shank

Suitable for: Steel, Stainless steel and copper

Suitable for: Steel, Stainless steel and copper

Suitable for: Steel, Stainless steel, Cast iron, Aluminum and...

Suitable for: Steel, Stainless steel, Cast iron, Aluminum and copper

Straight cutter for plastic Suitable for plastics with a low...

Straight cutter for plastic Suitable for plastics with a low melting point. In-boring and clockwise rotation

Solid carbide milling cutters for plastic processing,...

Solid carbide milling cutters for plastic processing, particularly suitable for acrylic. The spiral cuts result in virtually no heat development and the cutting pressure is very low. Cutting on the diameter with ground cut. Clockwise rotation

Solid carbide milling cutters for plastic processing,...

Solid carbide milling cutters for plastic processing, particularly suitable for acrylic. The spiral cuts result in virtually no heat development and the cutting pressure is very low. Cutting on the diameter with ground cut. Clockwise rotation

Solid carbide milling cutters for plastic processing,...

Solid carbide milling cutters for plastic processing, particularly suitable for acrylic. The spiral cuts result in virtually no heat development and the cutting pressure is very low. Cutting on the diameter with ground cut. Clockwise rotation

Solid carbide milling cutters for plastic processing,...

Solid carbide milling cutters for plastic processing, particularly suitable for acrylic. The spiral cuts result in virtually no heat development and the cutting pressure is very low. Cutting on the diameter with ground cut. Clockwise rotation

Solid carbide milling cutters for plastic processing,...

Solid carbide milling cutters for plastic processing, particularly suitable for acrylic. The spiral cuts result in virtually no heat development and the cutting pressure is very low. Cutting on the diameter with ground cut. Clockwise rotation

Solid carbide milling cutters for plastic processing,...

Solid carbide milling cutters for plastic processing, particularly suitable for acrylic. The spiral cuts result in virtually no heat development and the cutting pressure is very low. Cutting on the diameter with ground cut. Clockwise rotation

Dowel hole drill shank 8 mm for MAFELL Duo dowel

Dowel hole drill shank 8 mm for MAFELL Duo dowel

Dowel hole drill shank 8 mm for MAFELL Duo dowel

Dowel hole drill shank 8 mm for MAFELL Duo dowel

Dowel drill bit  S10 mm Lefthand rot.

Dowel drill bit  S10 mm Lefthand rot.

Dowel drill bit  S10 mm Righthand rot.

Dowel drill bit  S10 mm Righthand rot.

Arbor inclusive spacers and bearing no. B16 (D = 16). Suitable...

Arbor inclusive spacers and bearing no. B16 (D = 16). Suitable for groovers with bore 6,35 mm

Dowel hole drill shank 8 mm for MAFELL Duo dowel

Dowel hole drill shank 8 mm for MAFELL Duo dowel

Dowel drill bit  S10 mm Lefthand rot.

Dowel drill bit  S10 mm Lefthand rot.

Dowel drill bit  S10 mm Lefthand rot.

Dowel drill bit  S10 mm Lefthand rot.

Dowel drill bit  S10 mm Righthand rot.

Dowel drill bit  S10 mm Righthand rot.

Dowel drill bit  S10 mm Righthand rot.

Dowel drill bit  S10 mm Righthand rot.

Dowel drill bit  S10 mm Righthand rot.

Dowel drill bit  S10 mm Righthand rot.

Dowel hole drill shank 8 mm for MAFELL Duo dowel

Dowel hole drill shank 8 mm for MAFELL Duo dowel

Dowel drill bit  S10 mm Lefthand rot.

Dowel drill bit  S10 mm Lefthand rot.