JVL pro-line rounding over...
JVL pro-line rounding over bit 31.8mm
JVL pro-line rounding over bit 31.8mm
Filter By
Availability
Shank
Diameter (D)
Cutting length/height:
Total Length
Radius / Angle
Cutters
There are 67 products.
JVL pro-line rounding over bit 31.8mm
JVL pro-line rounding over bit 31.8mm
ENT Straight Cutter TC / One Flute with 8 mm shank
ENT Straight Cutter TC / One Flute with 8 mm shank
ENT Straight Cutter TC / One Flute with 8 mm shank
ENT Straight Cutter TC / One Flute with 8 mm shank
For drill bits with 10 mm shank and clamping surface. Suitable...
For drill bits with 10 mm shank and clamping surface. Suitable for machines from: Morbidelli, Biesse, Weeke, Reimall, Torwegge, Busellato, Bottcher, Gessner, Ayen S = M10x1,5 mmD = 19 mmL = 31 mmGL = 47 mm
For drill bits with 10 mm shank and clamping surface. Suitable...
For drill bits with 10 mm shank and clamping surface. Suitable for machines from: Morbidelli, Biesse, Weeke, Reimall, Torwegge, Busellato, Bottcher, Gessner, Ayen S = M10x1,5 mmD = 19 mmL = 31 mmGL = 47 mm
EPROCUT Flush trim bit HW Z=2 D=12,7 L=16 GL=48 S=8
EPROCUT Flush trim bit HW Z=2 D=12,7 L=16 GL=48 S=8
Straight bit shank 6 mm
Straight bit shank 6 mm
Dowel drill bit L70 S10 mm Righthand rot.
Dowel drill bit L70 S10 mm Righthand rot.
Dowel drill bit L70 S10 mm Righthand rot.
Dowel drill bit L70 S10 mm Righthand rot.
Dowel drill bit S10 mm Lefthand rot.
Dowel drill bit S10 mm Lefthand rot.
Dowel drill bit S10 mm Lefthand rot.
Dowel drill bit S10 mm Lefthand rot.
Dowel drill bit L70 S10 mm Righthand rot.
Dowel drill bit L70 S10 mm Righthand rot.
Dowel drill bit S10 mm Lefthand rot.
Dowel drill bit S10 mm Lefthand rot.
Through hole drill bit D6 L77 S10 mm Lefthand rot.
Through hole drill bit D6 L77 S10 mm Lefthand rot.
Through hole drill bit D5 L77 S10 mm Lefthand rot.
Through hole drill bit D5 L77 S10 mm Lefthand rot.
Through hole drill bit D4 L77 S10 mm Lefthand rot.
Through hole drill bit D4 L77 S10 mm Lefthand rot.
Through hole drill bit D6 L77 S10 mm Righthand rot.
Through hole drill bit D6 L77 S10 mm Righthand rot.
Through hole drill bit D5 L77 S10 mm Righthand rot.
Through hole drill bit D5 L77 S10 mm Righthand rot.
Through hole drill bit D4 L77 S10 mm Righthand rot.
Through hole drill bit D4 L77 S10 mm Righthand rot.
Through hole drill bit D8 L77 S10 mm Lefthand rot.
Through hole drill bit D8 L77 S10 mm Lefthand rot.
Through hole drill bit D7 L77 S10 mm Lefthand rot.
Through hole drill bit D7 L77 S10 mm Lefthand rot.
Through hole drill bit D8 L77 S10 mm Righthand rot.
Through hole drill bit D8 L77 S10 mm Righthand rot.
Through hole drill bit D7 L77 S10 mm Righthand rot.
Through hole drill bit D7 L77 S10 mm Righthand rot.
Through hole drill bit D9 L77 S10 mm Righthand rot.
Through hole drill bit D9 L77 S10 mm Righthand rot.
Dowel drill bit L70 S10 mm Righthand rot.
Dowel drill bit L70 S10 mm Righthand rot.
Dowel drill bit L70 S10 mm Righthand rot.
Dowel drill bit L70 S10 mm Righthand rot.
Dowel drill bit S10 mm Lefthand rot.
Dowel drill bit S10 mm Lefthand rot.
Bearing guide cutter for trimming protruding veneer and...
Bearing guide cutter for trimming protruding veneer and plastic edges. Also possible tocopy using a template. The small diameters are ideal for processing inside corners.