EPROCUT Flush trim bit HW Z2 D12.7 L16 GL48 S8
EPROCUT Flush trim bit HW Z=2 D=12,7 L=16 GL=48 S=8
- -10%
- -10%
Filter By
Availability
Shank
Diameter (D)
Cutting length/height:
Total Length
Cutters
Flush trim bit
There are 31 products.
EPROCUT Flush trim bit HW Z=2 D=12,7 L=16 GL=48 S=8
ENT trimming cutter TC12.7 x 25.4 x 68 mm with 6 mm shank
ENT trimming cutter TC 12.7 x 25.4 x 68 mm with 8mm shank
ENT trimming cutter TC 9.5 x 25.4 x 68 mm with 8mm shank
This results in a particularly clean result with thin coatings and long-fiber funnels.
This results in a particularly clean result with thin coatings and long-fiber funnels.
This results in a particularly clean result with thin coatings and long-fiber funnels.
This results in a particularly clean result with thin coatings and long-fiber funnels.
This results in a particularly clean result with thin coatings and long-fiber funnels.
Bearing guide cutter for trimming protruding veneer and plastic edges. Also possible tocopy using a template. The small diameters are ideal for processing inside corners.
Bearing guide cutter with three cutting edges for particularly fine milling results.Equipped with two ball bearings to make prints on sensitive workpieces to avoid.
Bearing guide cutter with three cutting edges for particularly fine milling results.Equipped with two ball bearings to make prints on sensitive workpieces to avoid.
for simultaneous machining of top and bottom edges. For material thickness up to 30 mm thickness.
Bearing guide cutter with three cutting edges for particularly fine milling results.Equipped with two ball bearings to make prints on sensitive workpieces to avoid.
Flush trim bit