Adjustable Grooving set...
adjustable Grooving set TYPE A + B - 160 x 8-28 mm Z=4+2 V=4
adjustable Grooving set TYPE A + B - 160 x 8-28 mm Z=4+2 V=4
- -15%
- -15%
Filter By
Availability
Bore
Thickness
Diameter (D)
Cutting length/height:
Radius / Angle
Cutters
There are 80 products.
Active filters
adjustable Grooving set TYPE A + B - 160 x 8-28 mm Z=4+2 V=4
adjustable Grooving set TYPE A + B - 160 x 8-28 mm Z=4+2 V=4
adjustable cutterhead for tenons 200 x 8-15 mm Z=4 V=4
adjustable cutterhead for tenons 200 x 8-15 mm Z=4 V=4
Stark adjustable cutterhead for tenons 250x8-15 TH06TM10
Stark adjustable cutterhead for tenons 250x8-15 TH06TM10
for high precision groove cutting, chip thickness limitation...
for high precision groove cutting, chip thickness limitation and reduced recoil, suitable for manual and mechanical feed.
Stark Adjustable grooving 160 x 4-7,5 Z=4 V=4
Stark Adjustable grooving 160 x 4-7,5 Z=4 V=4
Cutterhead with HW reversible knives and spurs for making thin...
Cutterhead with HW reversible knives and spurs for making thin precision grooves , adjustable by means of spacing rings. Spacing rings are included.
Cutterhead with HW reversible knives and spurs for making thin...
Cutterhead with HW reversible knives and spurs for making thin precision grooves , adjustable by means of spacing rings. Spacing rings are included.
Adjustable grooving cutter TYPE A + B - 140 x 4-15 mm Z=4+2 V=4
Adjustable grooving cutter TYPE A + B - 140 x 4-15 mm Z=4+2 V=4
Cutterhead with HW reversible knives and spurs for making...
Cutterhead with HW reversible knives and spurs for making precision grooves.
adjustable grooving TYPE A + B - 160 x 16-44mm
adjustable grooving TYPE A + B - 160 x 16-44mm
Stark Adjustable grooving TYPE A - 140X4-7,5 Z=4 V=4
Stark Adjustable grooving TYPE A - 140X4-7,5 Z=4 V=4
Stark adjustable grooving TYPE A - 160 x 16-30 mm
Stark adjustable grooving TYPE A - 160 x 16-30 mm
adjustable grooving TYPE A - 160x 12,4 -24 mm
adjustable grooving TYPE A - 160x 12,4 -24 mm
Steel body, standard tungsten carbide profiled knives for high...
Steel body, standard tungsten carbide profiled knives for high precision jointing in hardwood andsoftwood, suitable for end grain and corner joints (windows), for wood thicknesses 38-94 mm, suitablefor both manual and mechanical feed.
Steel body. standard tungsten carbide profiled knives for high...
Steel body. standard tungsten carbide profiled knives for high precision jointing in hardwood andsoftwood. suitable for end grain and corner joints (windows). for wood thicknesses 38-94 mm. suitablefor both manual and mechanical feed.
Stark along grain joint cutter 125X50 Z=2 YH152AAM
Stark along grain joint cutter 125X50 Z=2 YH152AAM
Stark Brazed Adjustable grooving 140 x 1,8 - 3,4 Z=4 V=4
Stark Brazed Adjustable grooving 140 x 1,8 - 3,4 Z=4 V=4
HW brazed cutter with spurs for making precision grooves with...
HW brazed cutter with spurs for making precision grooves with various thickness.The tool is complete with spacing rings.
Negative cutting angle. Suitable for cutting MDF, (double...
Negative cutting angle. Suitable for cutting MDF, (double faced) plastic laminated, hardboard and multilayer panels.
Negative cutting angle. Suitable for cutting MDF, (double...
Negative cutting angle. Suitable for cutting MDF, (double faced) plastic laminated, hardboard and multilayer panels.
This set was designed to produce a variety of concave and...
This set was designed to produce a variety of concave and convex rounds.It consists of a light alloy cutterhead with two R 4 mm knives mounted on the tool and four spare R 6 and R 8 mm knives.
Stark cross grain joint cutter 125X60 Z=3 YH156AAM
Stark cross grain joint cutter 125X60 Z=3 YH156AAM
Stark CUTTERHEAD FOR 45 degrees BEVELS 150mm
Stark CUTTERHEAD FOR 45 degrees BEVELS 150mm
Cutterhead for door frames with HW knives
Cutterhead for door frames with HW knives
Steel body, standard tungsten carbide profiled knives for...
Steel body, standard tungsten carbide profiled knives for milling hardwood and softwood, chip thicknesslimitation and reduced recoil, suitable for both manual and mechanical feed.
Stark cutterhead variable angle 160mm
Stark cutterhead variable angle 160mm
Cutterhead with adjustable angle knives for chamfering 140 mm...
Cutterhead with adjustable angle knives for chamfering 140 mm aluminum
Steel body. standard tungsten carbide profiled knives for...
Steel body. standard tungsten carbide profiled knives for milling hardwood and softwood. chip thicknesslimitation and reduced recoil. suitable for both manual and mechanical feed.