Double chamfering bit 45...
Double chamfering bit HW Z=2+2 A=45 degrees L=15 S=8
Double chamfering bit HW Z=2+2 A=45 degrees L=15 S=8
- -10%
- -10%
Filter By
Availability
Bore
Shank
Diameter (D)
Cutting length/height:
Total Length
Radius / Angle
Cutters
There are 6 products.
Double chamfering bit HW Z=2+2 A=45 degrees L=15 S=8
Double chamfering bit HW Z=2+2 A=45 degrees L=15 S=8
Double chamfering bit HW Z=2+2 A=45 degrees L=15 S=6
Double chamfering bit HW Z=2+2 A=45 degrees L=15 S=6
RT01 Pre milling cutter DP 80x55x30+2KN CW CCEN350035
RT01 Pre milling cutter DP 80x55x30+2KN CW CCEN350035
Negative alternate tooth end cutting saw blade 140x3.6x30+4...
Negative alternate tooth end cutting saw blade 140x3.6x30+4 Z=20+4 N3401N0464 STREAM - OMNIA. VERSIONS UP UNTIL DECEMBER 2016. Machiningoperations on supported and plastic edges. HW tips. Negative alternate tooth -20°. End cutting of glued edges. Max.rpm:12,000
Wirutex RT01 Pre milling cutter DP 80x55x30+2KN CCW CCEN350036
Wirutex RT01 Pre milling cutter DP 80x55x30+2KN CCW CCEN350036