Along grain joint cutter...
Stark along grain joint cutter 125X50 Z=2 YH152AAM
Stark along grain joint cutter 125X50 Z=2 YH152AAM
- -15%
- -15%
Filter By
Availability
Bore
Shank
Diameter (D)
Cutting length/height:
Total Length
Radius / Angle
Cutters
There are 33 products.
Active filters
Stark along grain joint cutter 125X50 Z=2 YH152AAM
Stark along grain joint cutter 125X50 Z=2 YH152AAM
Stark along grain joint cutter 125X50 Z=2 YH152AAM
Stark along grain joint cutter 125X50 Z=2 YH152AAM
Stark along grain joint cutter 125X50 Z=2 YH152AAM
Stark along grain joint cutter 125X50 Z=2 YH152AAM
Stark along grain joint cutter 125X50 Z=2 YH152AAM
Stark along grain joint cutter 125X50 Z=2 YH152AAM
Stark along grain joint cutter 125X50 Z=2 YH152AAM
Stark along grain joint cutter 125X50 Z=2 YH152AAM
Ball nose Spiral cutter Z1 Positive - Upcut for Plastics...
Ball nose Spiral cutter Z1 Positive - Upcut for Plastics Suitable for: Acrylonitrile butadiene styrene (ABS) Polycarbonate Polyethylene Polypropylene Polystyrene Polyvinyl chloride (PVC) Polymethyl methacrylate (Acrylic. Plexi etc.)
For use on twist drills with a 10 mm shank and a diameter of 4...
For use on twist drills with a 10 mm shank and a diameter of 4 mm to 10 mm.The countersinkis guided to the shank via the drill spiral and fastened there.
For use on twist drills with a 10 mm shank and a diameter of 4...
For use on twist drills with a 10 mm shank and a diameter of 4 mm to 10 mm.The countersinkis guided to the shank via the drill spiral and fastened there.
Raised panel cutter GOG20
Raised panel cutter GOG20
Shallow finger pull cutter
Shallow finger pull cutter
Single flute cutter for plastic and aluminium
Single flute cutter for plastic and aluminium
Solid carbide milling cutter with rounded chip chamber and...
Solid carbide milling cutter with rounded chip chamber and mirror grinding. Optimized cutting geometry for processing all non-ferrous metals.
Spiral cutter Z2 Positive - Upcut for Plastics Suitable for:...
Spiral cutter Z2 Positive - Upcut for Plastics Suitable for: Acrylonitrile butadiene styrene (ABS) Polycarbonate Polyethylene Polypropylene Polystyrene Polyvinyl chloride (PVC) Polymethyl methacrylate (Acrylic. Plexi etc.)
Titman face milling router bit for wood D=35 L=18 Shank 8 mm
Titman face milling router bit for wood D=35 L=18 Shank 8 mm