Filter By
Availability
Bore
Shank
Diameter (D)
Cutting length/height:
Total Length
Radius / Angle
Cutters
Dovetail bit Z=2 D=10 A=10° L=9 GL=45 S=8
Dovetail bit Z=2 D=10 A=10° L=9 GL=45 S=8
For contouring, boring and sizing panels in chipboard and MDF,...
For contouring, boring and sizing panels in chipboard and MDF, unpolished or faced.
For contouring, boring and sizing panels in chipboard and MDF,...
For contouring, boring and sizing panels in chipboard and MDF, unpolished or faced.
For contouring, boring and sizing panels in chipboard and MDF,...
For contouring, boring and sizing panels in chipboard and MDF, unpolished or faced.
Profile guide cutter with bearing on shank
Profile guide cutter with bearing on shank
Rounding cutter 60 x 9 x 20+2KN R1 CW N3401N0284
Rounding cutter 60 x 9 x 20+2KN R1 CW N3401N0284
Rounding over cutter with bearing for solid surface materials
Rounding over cutter with bearing for solid surface materials
Rounding over cutter with extended and tapering cutting edges....
Rounding over cutter with extended and tapering cutting edges. This prevents adhesive residues from getting stuck between the cutting edges and the thrust bearing and causing excessive temperatures.
Rounding over cutter with extended and tapering cutting edges....
Rounding over cutter with extended and tapering cutting edges. This prevents adhesive residues from getting stuck between the cutting edges and the thrust bearing and causing excessive temperatures.
Spiral cutter Z1 Positive - Upcut for Plastics Suitable for:...
Spiral cutter Z1 Positive - Upcut for Plastics Suitable for: Acrylonitrile butadiene styrene (ABS) Polycarbonate Polyethylene Polypropylene Polystyrene Polyvinyl chloride (PVC) Polymethyl methacrylate (Acrylic. Plexi etc.)
Spiral finishing cutter upcut Z1
Spiral finishing cutter upcut Z1
Spiral finishing cutter downcut Z1
Spiral finishing cutter downcut Z1
Titman flute bit R=4 S=8
Titman flute bit R=4 S=8
Titman rounding cutter D=16,3 L=9 R=4 d=6,35 S=8
Titman rounding cutter D=16,3 L=9 R=4 d=6,35 S=8
