Dovetail bit 10° Z2 D10 L9...
Dovetail bit Z=2 D=10 A=10° L=9 GL=45 S=8
Dovetail bit Z=2 D=10 A=10° L=9 GL=45 S=8
- -10%
- -10%
Filter By
Availability
Bore
Shank
Diameter (D)
Cutting length/height:
Total Length
Radius / Angle
Cutters
There are 21 products.
Dovetail bit Z=2 D=10 A=10° L=9 GL=45 S=8
Dovetail bit Z=2 D=10 A=10° L=9 GL=45 S=8
Finishing cutter for through-hole milling Z3 For spy hole...
Finishing cutter for through-hole milling Z3 For spy hole milling and through holes
Finishing cutter for through-hole milling Z3 For spy hole...
Finishing cutter for through-hole milling Z3 For spy hole milling and through holes
Finishing cutter for through-hole milling Z3 For spy hole...
Finishing cutter for through-hole milling Z3 For spy hole milling and through holes
LOW-NOISE 30° pre-milling cutter 80x65x30+2KN CCEN350127
LOW-NOISE 30° pre-milling cutter 80x65x30+2KN CCEN350127
Profile guide cutter with bearing on shank
Profile guide cutter with bearing on shank
Roughing cutter for through-hole milling Z3 For pusher hole...
Roughing cutter for through-hole milling Z3 For pusher hole drilling and lock cylinder milling
Roughing cutter for through-hole milling Z3 For pusher hole...
Roughing cutter for through-hole milling Z3 For pusher hole drilling and lock cylinder milling
Roughing cutter for through-hole milling Z3 For pusher hole...
Roughing cutter for through-hole milling Z3 For pusher hole drilling and lock cylinder milling
Rounding cutter 60 x 9 x 20+2KN R1 CW N3401N0284
Rounding cutter 60 x 9 x 20+2KN R1 CW N3401N0284
Rounding over cutter with bearing for solid surface materials
Rounding over cutter with bearing for solid surface materials
Rounding over cutter with extended and tapering cutting edges....
Rounding over cutter with extended and tapering cutting edges. This prevents adhesive residues from getting stuck between the cutting edges and the thrust bearing and causing excessive temperatures.
Rounding over cutter with extended and tapering cutting edges....
Rounding over cutter with extended and tapering cutting edges. This prevents adhesive residues from getting stuck between the cutting edges and the thrust bearing and causing excessive temperatures.
Spiral cutter Z1 Positive - Upcut for Plastics Suitable for:...
Spiral cutter Z1 Positive - Upcut for Plastics Suitable for: Acrylonitrile butadiene styrene (ABS) Polycarbonate Polyethylene Polypropylene Polystyrene Polyvinyl chloride (PVC) Polymethyl methacrylate (Acrylic. Plexi etc.)
Titman flute bit R=4 S=8
Titman flute bit R=4 S=8
Titman rounding cutter D=16,3 L=9 R=4 d=6,35 S=8
Titman rounding cutter D=16,3 L=9 R=4 d=6,35 S=8