Filter By
Availability
Bore
Thickness
Shank
Diameter (D)
Cutting length/height:
Total Length
Radius / Angle
Cutters
Bearing guide trimmer double bearing for solid surface
Bearing guide trimmer double bearing for solid surface
Bearing guide trimmer double bearing for solid surface
Bearing guide trimmer double bearing for solid surface
circular saw blade JVL OPTIMUS - Multi-layer AlTiCN coating...
circular saw blade JVL OPTIMUS - Multi-layer AlTiCN coating with a 3.0 µm thickness- Best coating for cutting all kinds of material- Top of the bill saw blade for heavy cutting conditions- Can be used with emulsion or spray cooling, for all metals (no blade change required)- Suitable for Flying...
315 x2,5 x 32 Z160 Circular saw blade JVL OPTIMUS -...
315 x2,5 x 32 Z160 Circular saw blade JVL OPTIMUS - Multi-layer AlTiCN coating with a 3.0 µm thickness- Best coating for cutting all kinds of material- Top of the bill saw blade for heavy cutting conditions- Can be used with emulsion or spray cooling, for all metals (no blade change required)-...
circular saw blade JVL OPTIMUS - Multi-layer AlTiCN coating...
circular saw blade JVL OPTIMUS - Multi-layer AlTiCN coating with a 3.0 µm thickness- Best coating for cutting all kinds of material- Top of the bill saw blade for heavy cutting conditions- Can be used with emulsion or spray cooling, for all metals (no blade change required)- Suitable for Flying...
circular saw blade JVL OPTIMUS - Multi-layer AlTiCN coating...
circular saw blade JVL OPTIMUS - Multi-layer AlTiCN coating with a 3.0 µm thickness- Best coating for cutting all kinds of material- Top of the bill saw blade for heavy cutting conditions- Can be used with emulsion or spray cooling, for all metals (no blade change required)- Suitable for Flying...
circular saw blade JVL OPTIMUS - Multi-layer AlTiCN coating...
circular saw blade JVL OPTIMUS - Multi-layer AlTiCN coating with a 3.0 µm thickness- Best coating for cutting all kinds of material- Top of the bill saw blade for heavy cutting conditions- Can be used with emulsion or spray cooling, for all metals (no blade change required)- Suitable for Flying...
EPROCUT Flush trim bit HW Z=2 D=12,7 L=16 GL=48 S=8
EPROCUT Flush trim bit HW Z=2 D=12,7 L=16 GL=48 S=8
JVL STEAM Circular saw blade 315 x 32 x 2 Z120 T8 - High speed...
JVL STEAM Circular saw blade 315 x 32 x 2 Z120 T8 - High speed tungsten Molybdenum steel HSS DMo5 M2 - Steam threated. entry level blade - Suitable for manual and semi automatic cut off machines. - Holes (MX) 2/8/45 + 2/9/50 + 2/11/63
JVL STEAM circular saw blade 315mm x 32 x 2 Z200 - High speed...
JVL STEAM circular saw blade 315mm x 32 x 2 Z200 - High speed tungsten Molybdenum steel HSS DMo5 M2 - Steam threated. entry level blade - Suitable for manual and semi automatic cut off machines. - Holes (MX) 2/8/45 + 2/9/50 + 2/11/63
Keyhole bit HW D=12,7 mm S=8
Keyhole bit HW D=12,7 mm S=8
Trimming cutter with bearing on shank for scanning overhead...
Trimming cutter with bearing on shank for scanning overhead templates. With centertip for immersion like a drill. Suitable for coated boards. solid woods and wood-basedmaterials.
Trimming cutter with bearing on shank for scanning overhead...
Trimming cutter with bearing on shank for scanning overhead templates. With centertip for immersion like a drill. Suitable for coated boards. solid woods and wood-basedmaterials.
Trimming cutter with bearing on shank for scanning overhead...
Trimming cutter with bearing on shank for scanning overhead templates. With centertip for immersion like a drill. Suitable for coated boards. solid woods and wood-basedmaterials.
Profile guide cutter with bearing on shank
Profile guide cutter with bearing on shank
Replacement tip Straight bit Z=1 Shank 12 mm
Replacement tip Straight bit Z=1 Shank 12 mm
Replacement tip Straight bit Z=1 Shank M10x1.5
Replacement tip Straight bit Z=1 Shank M10x1.5
Replacement tip Straight bit Z=1 Shank M12x1
Replacement tip Straight bit Z=1 Shank M12x1
Single flute cutter Z=2 Negative for solid surface
Single flute cutter Z=2 Negative for solid surface
Single flute cutter Z=1 for solid surface
Single flute cutter Z=1 for solid surface
Single flute cutter Z=2 Negative for solid surface
Single flute cutter Z=2 Negative for solid surface
Straight bit shank 12 mm
Straight bit shank 12 mm
Straight bit shank 12 mm
Straight bit shank 12 mm
Bearing guide cutter with three cutting edges for particularly...
Bearing guide cutter with three cutting edges for particularly fine milling results.Equipped with two ball bearings to make prints on sensitive workpieces to avoid.
Bearing guide cutter with three cutting edges for particularly...
Bearing guide cutter with three cutting edges for particularly fine milling results.Equipped with two ball bearings to make prints on sensitive workpieces to avoid.
Bearing guide cutter with three cutting edges for particularly...
Bearing guide cutter with three cutting edges for particularly fine milling results.Equipped with two ball bearings to make prints on sensitive workpieces to avoid.
Bearing guide cutter with three cutting edges for particularly...
Bearing guide cutter with three cutting edges for particularly fine milling results.Equipped with two ball bearings to make prints on sensitive workpieces to avoid.
Trimmers with bearing
Trimmers with bearing
