Bearing guide trimmer D19...
Bearing guide trimmer double bearing for solid surface
Bearing guide trimmer double bearing for solid surface
- -10%
- -10%
Filter By
Availability
Shank
Diameter (D)
Cutting length/height:
Total Length
Radius / Angle
Cutters
There are 96 products.
Bearing guide trimmer double bearing for solid surface
Bearing guide trimmer double bearing for solid surface
Bearing guide trimmer Z2 for solid surface Suitable for...
Bearing guide trimmer Z2 for solid surface Suitable for Corian Hi-Macs Staron Avonite Hanex Varicor domovari
Bevel cutter with real center cutting edge for direct...
Bevel cutter with real center cutting edge for direct immersion in the material. For foldingand chamfering wood, laminate and plastic sheets.
for simultaneous machining of top and bottom edges. For...
for simultaneous machining of top and bottom edges. For material thickness up to 30 mm thickness.
S = M10x1,5 mm D = 18 mmL = 25 mmGL = 50 mm
S = M10x1,5 mm D = 18 mmL = 25 mmGL = 50 mm
S = M10x1,5 mm D = 18 mmL = 25 mmGL = 50 mm
S = M10x1,5 mm D = 18 mmL = 25 mmGL = 50 mm
S = M10x1,5 mm D = 18 mmL = 25 mmGL = 50 mm
S = M10x1,5 mm D = 18 mmL = 25 mmGL = 50 mm
S = M10x1,5 mm D = 18 mmL = 25 mmGL = 50 mm
S = M10x1,5 mm D = 18 mmL = 25 mmGL = 50 mm
For drill bits with 10 mm shank and clamping surface. Suitable...
For drill bits with 10 mm shank and clamping surface. Suitable for machines from: Morbidelli, Biesse, Weeke, Reimall, Torwegge, Busellato, Bottcher, Gessner, Ayen S = M10x1,5 mmD = 19 mmL = 31 mmGL = 47 mm
For drill bits with 10 mm shank and clamping surface. Suitable...
For drill bits with 10 mm shank and clamping surface. Suitable for machines from: Albert, SCM, Schleicher, Vitap, Balestrini, Ombe, Bilek S = M10x1,5 mmD = 19 mmA = 15°L = 20 mmGL = 46 mm
For drill bits with 10 mm shank and clamping surface. Suitable...
For drill bits with 10 mm shank and clamping surface. Suitable for machines from: Morbidelli, Biesse, Weeke, Reimall, Torwegge, Busellato, Bottcher, Gessner, Ayen S = M10x1,5 mmD = 19 mmL = 31 mmGL = 47 mm
For drill bits with 10 mm shank and clamping surface. Suitable...
For drill bits with 10 mm shank and clamping surface. Suitable for machines from: Albert, SCM, Schleicher, Vitap, Balestrini, Ombe, Bilek S = M10x1,5 mmD = 19 mmA = 15°L = 20 mmGL = 46 mm
Finger pull Cutters
Finger pull Cutters
Finger pull Cutters
Finger pull Cutters
Finger pull Cutters
Finger pull Cutters
Finishing cutter for through-hole milling Z3 For spy hole...
Finishing cutter for through-hole milling Z3 For spy hole milling and through holes
Guttering cutter for solid surface
Guttering cutter for solid surface
Guttering profile cutter for solid surface
Guttering profile cutter for solid surface
Lock case cutter rough toothing Z=3
Lock case cutter rough toothing Z=3
Pattern bit with replaceable knives L60/4 Z=2 D=19 L=60 S=12
Pattern bit with replaceable knives L60/4 Z=2 D=19 L=60 S=12
Pattern bit Z=2 D=19 L=12 S=8
Pattern bit Z=2 D=19 L=12 S=8
Pattern bit Z=2 D=19 L=20 S=8
Pattern bit Z=2 D=19 L=20 S=8
Trimming cutter with bearing on shank for scanning overhead...
Trimming cutter with bearing on shank for scanning overhead templates. With centertip for immersion like a drill. Suitable for coated boards. solid woods and wood-basedmaterials.
Trimming cutter with bearing on shank for scanning overhead...
Trimming cutter with bearing on shank for scanning overhead templates. With centertip for immersion like a drill. Suitable for coated boards. solid woods and wood-basedmaterials.