copy of CUTTERHEAD FOR 45...
Stark CUTTERHEAD FOR 45 degrees BEVELS 150mm
Stark CUTTERHEAD FOR 45 degrees BEVELS 150mm
- -15%
- -15%
Filter By
Availability
Bore
Thickness
Shank
Diameter (D)
Cutting length/height:
Total Length
Radius / Angle
Cutters
There are 38 products.
Stark CUTTERHEAD FOR 45 degrees BEVELS 150mm
Stark CUTTERHEAD FOR 45 degrees BEVELS 150mm
Stark CUTTERHEAD FOR 45 degrees BEVELS 150mm
Stark CUTTERHEAD FOR 45 degrees BEVELS 150mm
Stark CUTTERHEAD FOR 45 degrees BEVELS 150mm
Stark CUTTERHEAD FOR 45 degrees BEVELS 150mm
Double rounding over / chamfer bit adjustable HW Z=2+2 D=22...
Double rounding over / chamfer bit adjustable HW Z=2+2 D=22 R=2,5 A=45 degrees Shank 12 mm
Double rounding over / chamfer bit adjustable HW Z=2+2 D=22...
Double rounding over / chamfer bit adjustable HW Z=2+2 D=22 R=2,5 A=45 degrees shank 8 mm
End cutting sawblade 150x3.2x55+4 Z32+4 CSEN750036 IT03 End...
End cutting sawblade 150x3.2x55+4 Z32+4 CSEN750036 IT03 End Trimming Unit
Finger pull Cutters D=22 R1=3 R2=1 S=12mm FPC22-12
Finger pull Cutters D=22 R1=3 R2=1 S=12mm FPC22-12
Guttering cutter for solid surface
Guttering cutter for solid surface
Miniature bevel cutter with bearing 45 degrees
Miniature bevel cutter with bearing 45 degrees
Miniature bevel cutter with bearing 45 degrees
Miniature bevel cutter with bearing 45 degrees
Profile mould cutter for hand holes in solid material
Profile mould cutter for hand holes in solid material
Profile mould cutter for hand holes in solid material
Profile mould cutter for hand holes in solid material
Profile mould cutter for hand holes in solid material
Profile mould cutter for hand holes in solid material
Stark rebate cutter steel body 150 x 50 mm
Stark rebate cutter steel body 150 x 50 mm
Stark rebate cutter steel body 150 x 50 mm
Stark rebate cutter steel body 150 x 50 mm
Stark rebate cutter steel body 150 x 50 mm
Stark rebate cutter steel body 150 x 50 mm
Stark rebate cutter steel body 150 x 50 mm
Stark rebate cutter steel body 150 x 50 mm
Stark rebate cutter steel body 150 x 50 mm
Stark rebate cutter steel body 150 x 50 mm
Replacement tip Straight bit Z=2 Shank 12 mm
Replacement tip Straight bit Z=2 Shank 12 mm
Rounding over cutter with guide pin shank 8 mm
Rounding over cutter with guide pin shank 8 mm
Rounding over cutter with bearing for solid surface materials
Rounding over cutter with bearing for solid surface materials