Double rounding over / chamfer bit adjustable HW Z=2+2 D=22...

Double rounding over / chamfer bit adjustable HW Z=2+2 D=22 R=2,5 A=45 degrees Shank 12 mm

Double rounding over / chamfer bit adjustable HW Z=2+2 D=22...

Double rounding over / chamfer bit adjustable HW Z=2+2 D=22 R=2,5 A=45 degrees shank 8 mm

Finger pull Cutters D=22 R1=3 R2=1 S=12mm FPC22-12

Finger pull Cutters D=22 R1=3 R2=1 S=12mm FPC22-12

Guttering cutter for solid surface

Guttering cutter for solid surface

Guttering cutter

Guttering cutter

Miniature bevel cutter with bearing 45 degrees

Miniature bevel cutter with bearing 45 degrees

Miniature bevel cutter with bearing 45 degrees

Miniature bevel cutter with bearing 45 degrees

Profile cutter PCC22

Profile cutter PCC22

Profile cutter SBBC2

Profile cutter SBBC2

Profile cutter SBBC3

Profile cutter SBBC3

Profile cutter SBBC5

Profile cutter SBBC5

Profile mould cutter for hand holes in solid material

Profile mould cutter for hand holes in solid material

Profile mould cutter for hand holes in solid material

Profile mould cutter for hand holes in solid material

Profile mould cutter for hand holes in solid material

Profile mould cutter for hand holes in solid material

Replacement tip Straight bit Z=2 Shank 12 mm

Replacement tip Straight bit Z=2 Shank 12 mm

Rounding over cutter with guide pin shank 8 mm

Rounding over cutter with guide pin shank 8 mm

Rounding over cutter with bearing for solid surface materials

Rounding over cutter with bearing for solid surface materials

Rounding over cutter with extended and tapering cutting edges....

Rounding over cutter with extended and tapering cutting edges. This prevents adhesive residues from getting stuck between the cutting edges and the thrust bearing and causing excessive temperatures.

Rounding over cutter with extended and tapering cutting edges....

Rounding over cutter with extended and tapering cutting edges. This prevents adhesive residues from getting stuck between the cutting edges and the thrust bearing and causing excessive temperatures.

Solid carbide milling cutter with rounded chip chamber and...

Solid carbide milling cutter with rounded chip chamber and mirror grinding. Optimized cutting geometry for processing all non-ferrous metals.

Solid carbide milling cutters for plastic processing,...

Solid carbide milling cutters for plastic processing, particularly suitable for acrylic. The spiral cuts result in virtually no heat development and the cutting pressure is very low. Cutting on the diameter with ground cut. Clockwise rotation

Spiral cutter Z1 Negative - Down cut for Plastics Suitable...

Spiral cutter Z1 Negative - Down cut for Plastics Suitable for: Acrylonitrile butadiene styrene (ABS) Polycarbonate Polyethylene Polypropylene Polystyrene Polyvinyl chloride (PVC) Polymethyl methacrylate (Acrylic. Plexi etc.)

Spiral cutter Z1 Positive - Upcut for Plastics Suitable for:...

Spiral cutter Z1 Positive - Upcut for Plastics Suitable for: Acrylonitrile butadiene styrene (ABS) Polycarbonate Polyethylene Polypropylene Polystyrene Polyvinyl chloride (PVC) Polymethyl methacrylate (Acrylic. Plexi etc.)

Spiral cutter Z1 Positive - Upcut for Plastics Suitable for:...

Spiral cutter Z1 Positive - Upcut for Plastics Suitable for: Acrylonitrile butadiene styrene (ABS) Polycarbonate Polyethylene Polypropylene Polystyrene Polyvinyl chloride (PVC) Polymethyl methacrylate (Acrylic. Plexi etc.)

Straight bit shank 8mm

Straight bit shank 8mm

Straight bit shank 8mm

Straight bit shank 8mm