For use on twist drills with a 10 mm shank and a diameter of 4...

For use on twist drills with a 10 mm shank and a diameter of 4 mm to 10 mm.The countersinkis guided to the shank via the drill spiral and fastened there.

For use on twist drills with a 10 mm shank and a diameter of 4...

For use on twist drills with a 10 mm shank and a diameter of 4 mm to 10 mm.The countersinkis guided to the shank via the drill spiral and fastened there.

Coving cutter with 90 degrees tangential outlet for solid surface

Coving cutter with 90 degrees tangential outlet for solid surface

Dovetail bit HW Z=2 D=20 A=10 degrees L=16 GL=52 S=10

Dovetail bit HW Z=2 D=20 A=10 degrees L=16 GL=52 S=10

Face milling bit HW Z=2 D=20 L=13 GL=45 S=8

Face milling bit HW Z=2 D=20 L=13 GL=45 S=8

Guttering cutter

Guttering cutter

Guttering cutter

Guttering cutter

Guttering cutter with high cutting length 12 mm Shank

Guttering cutter with high cutting length 12 mm Shank

Lock case cutter rough toothing Z=3

Lock case cutter rough toothing Z=3

Profile cutter ROG20

Profile cutter ROG20

Radius engraving cutter These double-edged cutters create a...

Radius engraving cutter These double-edged cutters create a flat of approx. 1 mm at the bottom.

Replacement tip Straight bit Z=2 Shank 12 mm

Replacement tip Straight bit Z=2 Shank 12 mm

Replacement tip Straight bit Z=2 Shank 12 mm

Replacement tip Straight bit Z=2 Shank 12 mm

Replacement tip straight cutter internal thread M12x1

Replacement tip straight cutter internal thread M12x1

Replacement tip straight cutter internal thread M12x1

Replacement tip straight cutter internal thread M12x1

Replacement tip straight cutter internal thread M12x1

Replacement tip straight cutter internal thread M12x1

Replacement tip straight cutter internal thread M12x1

Replacement tip straight cutter internal thread M12x1

Replacement tip Straight bit Z=2 S=8

Replacement tip Straight bit Z=2 S=8

Ballbearings diameter 16 mm and 12,7 mm included.

Ballbearings diameter 16 mm and 12,7 mm included.

Solid carbide milling cutter with rounded chip chamber and...

Solid carbide milling cutter with rounded chip chamber and mirror grinding. Optimized cutting geometry for processing all non-ferrous metals.

Solid carbide milling cutters for plastic processing,...

Solid carbide milling cutters for plastic processing, particularly suitable for acrylic. The spiral cuts result in virtually no heat development and the cutting pressure is very low. Cutting on the diameter with ground cut. Clockwise rotation

Spiral cutter Z1 Negative - Down cut for Plastics Suitable...

Spiral cutter Z1 Negative - Down cut for Plastics Suitable for: Acrylonitrile butadiene styrene (ABS) Polycarbonate Polyethylene Polypropylene Polystyrene Polyvinyl chloride (PVC) Polymethyl methacrylate (Acrylic. Plexi etc.)

Spiral cutter Z1 Positive - Upcut for Plastics Suitable for:...

Spiral cutter Z1 Positive - Upcut for Plastics Suitable for: Acrylonitrile butadiene styrene (ABS) Polycarbonate Polyethylene Polypropylene Polystyrene Polyvinyl chloride (PVC) Polymethyl methacrylate (Acrylic. Plexi etc.)

Spiral cutter Z1 Positive - Upcut for Plastics Suitable for:...

Spiral cutter Z1 Positive - Upcut for Plastics Suitable for: Acrylonitrile butadiene styrene (ABS) Polycarbonate Polyethylene Polypropylene Polystyrene Polyvinyl chloride (PVC) Polymethyl methacrylate (Acrylic. Plexi etc.)

Spiral finishing cutter upcut Z2

Spiral finishing cutter upcut Z2

Spiral finishing cutter upcut Z2

Spiral finishing cutter upcut Z2

Spiral finishing cutter upcut Z2

Spiral finishing cutter upcut Z2