Bevel cutter with beveled...
For edging sinks and vanity bowls. The special taper on the...
For edging sinks and vanity bowls. The special taper on the Bearing sleeve allows for perfect guide following around the inside of the bowl.
- -10%
- -10%
Filter By
Availability
Bore
Thickness
Shank
Diameter (D)
Cutting length/height:
Total Length
Radius / Angle
Cutters
There are 29 products.
For edging sinks and vanity bowls. The special taper on the...
For edging sinks and vanity bowls. The special taper on the Bearing sleeve allows for perfect guide following around the inside of the bowl.
Cove mould cutter for solid surface
Cove mould cutter for solid surface
Cove mould cutter with bearing
Cove mould cutter with bearing
Face milling bit D=80 L=12 S=16mm
Face milling bit D=80 L=12 S=16mm
Groover D=80 L=4 with bore 12 mm
Groover D=80 L=4 with bore 12 mm
Groover D=80 L=4 with bore 12 mm
Groover D=80 L=4 with bore 12 mm
Groover D=80 L=4 with bore 12 mm
Groover D=80 L=4 with bore 12 mm
Groover D=80 L=4 with bore 12 mm
Groover D=80 L=4 with bore 12 mm
Groover D=80 L=4 with bore 12 mm
Groover D=80 L=4 with bore 12 mm
Helical head for medium finishing with body in light alloy...
Helical head for medium finishing with body in light alloy equipped with 12 pieces 14x14x2 knives (600201) in HW with four cutting edges.
Helical head for medium finishing with body in light alloy
Helical head for medium finishing with body in light alloy
Helical head for medium finishing with body in light alloy
Helical head for medium finishing with body in light alloy
Helical head for medium finishing with body in light alloy...
Helical head for medium finishing with body in light alloy equipped with 12 pieces 14x14x2 knives (600201) in HW with four cutting edges.
Helical head for medium finishing with body in light alloy
Helical head for medium finishing with body in light alloy
LOW-NOISE 30° degrees pre-milling cutter 80x48x30+2KN...
LOW-NOISE 30° degrees pre-milling cutter 80x48x30+2KN CCEN350128
LOW-NOISE 30° pre-milling cutter 80x65x30+2KN CCEN350127
LOW-NOISE 30° pre-milling cutter 80x65x30+2KN CCEN350127
LOW-NOISE 45° pre-milling cutter 80x49x30+2KN CSEN350085 for...
LOW-NOISE 45° pre-milling cutter 80x49x30+2KN CSEN350085 for Biesse Machines
Overlapped trimmer with interchangeable knives 80 x 25 x...
Overlapped trimmer with interchangeable knives 80 x 25 x 16+2KN N3401N0428 RS10 Rough trimming unit
Profile mould cutter
Profile mould cutter
Profile mould cutter
Profile mould cutter
Rebate cutter with bearing
Rebate cutter with bearing
RT01 Pre milling cutter DP 80x55x30+2KN CW CCEN350035
RT01 Pre milling cutter DP 80x55x30+2KN CW CCEN350035
Titman flute bit HW Z=2 D=32 R=12 L=20 GL=60 S=12
Titman flute bit HW Z=2 D=32 R=12 L=20 GL=60 S=12
Wirutex RT01 Pre milling cutter DP 80x55x30+2KN CCW CCEN350036
Wirutex RT01 Pre milling cutter DP 80x55x30+2KN CCW CCEN350036