Filter By
Availability
Bore
Thickness
Shank
Diameter (D)
Cutting length/height:
Total Length
Radius / Angle
Cutters
Bevel cutter with high cutting length
Bevel cutter with high cutting length
Bevel cutter S=8 with high diameter
Bevel cutter S=8 with high diameter
For folding, profiling and formatting in one operation.
For folding, profiling and formatting in one operation.
Bevel cutter heavy duty
Bevel cutter heavy duty
Adjustable Double chamfering bit with bearing 16 to 32 mm....
Adjustable Double chamfering bit with bearing 16 to 32 mm. Titman BCS38-12
Groovers Z=2 d=6.35
Groovers Z=2 d=6.35
Groovers Z=2 d=6.35
Groovers Z=2 d=6.35
Groovers Z=2 d=6.35
Groovers Z=2 d=6.35
Groovers Z=2 d=6.35
Groovers Z=2 d=6.35
Groovers Z=2 d=6.35
Groovers Z=2 d=6.35
Rebate cutter with bearing
Rebate cutter with bearing
Replacement tip rebate cutter with bearing
Replacement tip rebate cutter with bearing
For folding, profiling and formatting in one operation.
For folding, profiling and formatting in one operation.
Shallow finger pull cutter
Shallow finger pull cutter
rounding over both sides at once.Suitable for material...
rounding over both sides at once.Suitable for material thickness 16 tot 32 mm.Supplied with a range of shims.
Titman Staff / corner bead bit with bearing HW Z=2 D=38 L=28...
Titman Staff / corner bead bit with bearing HW Z=2 D=38 L=28 R=9,5 S=8
V-Groove cutter 135° S8mm for ALUCOBOND, DiBOND, REYNOBOND
V-Groove cutter 135° S8mm for ALUCOBOND, DiBOND, REYNOBOND
V-Groove cutter, These cutters create a straight line of...
V-Groove cutter, These cutters create a straight line of approx. 1 mm at the bottom.
Cutter combination for milling grooves for flashover seals....
Cutter combination for milling grooves for flashover seals. Suitable for seals from: Schlegel QL-3434, QL-3070Deventer SV33, SP33, DS6677Trelleborg/Dipro L2020, L5019, L5020, L8003Goll AFK2615
Cutter combination for milling grooves for flashover seals....
Cutter combination for milling grooves for flashover seals. Suitable for seals from: Schlegel QL-3434, QL-3070Deventer SV33, SP33, DS6677Trelleborg/Dipro L2020, L5019, L5020, L8003Goll AFK2615
Cutter combination for milling grooves for flashover seals....
Cutter combination for milling grooves for flashover seals. Suitable for seals from: Schlegel QL-3434, QL-3070Deventer SV33, SP33, DS6677Trelleborg/Dipro L2020, L5019, L5020, L8003Goll AFK2615
