Filter By
Availability
Shank
Diameter (D)
Cutting length/height:
Total Length
Radius / Angle
Cutters
Bevel cutter with high cutting length
Bevel cutter with high cutting length
Bevel cutter heavy duty
Bevel cutter heavy duty
Bevel cutter with bearing
Bevel cutter with bearing
Bevel cutter with bearing for solid surface
Bevel cutter with bearing for solid surface
Bevel cutter with real center cutting edge for direct...
Bevel cutter with real center cutting edge for direct immersion in the material. For foldingand chamfering wood, laminate and plastic sheets.
For chamfering thin sheets, plywood, acrylic, etc. For...
For chamfering thin sheets, plywood, acrylic, etc. For interior and exterior contours.
Adjustable Double chamfering bit with bearing 16 to 32 mm....
Adjustable Double chamfering bit with bearing 16 to 32 mm. Titman BCS38-12
Profile mould cutter
Profile mould cutter
Rebate cutter with bearing
Rebate cutter with bearing
Shallow finger pull cutter
Shallow finger pull cutter
Straight bit shank 8mm
Straight bit shank 8mm
Straight bit shank 12 mm
Straight bit shank 12 mm
T-Slot cutter with radius
T-Slot cutter with radius
rounding over both sides at once.Suitable for material...
rounding over both sides at once.Suitable for material thickness 16 tot 32 mm.Supplied with a range of shims.
Titman Staff / corner bead bit with bearing HW Z=2 D=38 L=28...
Titman Staff / corner bead bit with bearing HW Z=2 D=38 L=28 R=9,5 S=8
Titman Staff / corner bead HW Z=2 D=28,7 L=23 R=6,3 S=8
Titman Staff / corner bead HW Z=2 D=28,7 L=23 R=6,3 S=8
The following items are required to create the appropriate...
The following items are required to create the appropriate groove:Groover G36552-6.35 and arbor LDTA/8
V-Groove cutter, These cutters create a straight line of...
V-Groove cutter, These cutters create a straight line of approx. 1 mm at the bottom.
