copy of CUTTERHEAD FOR 45...
Stark CUTTERHEAD FOR 45 degrees BEVELS 150mm
Stark CUTTERHEAD FOR 45 degrees BEVELS 150mm
- -15%
- -15%
Filter By
Availability
Bore
Thickness
Shank
Diameter (D)
Cutting length/height:
Total Length
Cutters
There are 37 products.
Stark CUTTERHEAD FOR 45 degrees BEVELS 150mm
Stark CUTTERHEAD FOR 45 degrees BEVELS 150mm
Stark CUTTERHEAD FOR 45 degrees BEVELS 150mm
Stark CUTTERHEAD FOR 45 degrees BEVELS 150mm
Stark CUTTERHEAD FOR 45 degrees BEVELS 150mm
Stark CUTTERHEAD FOR 45 degrees BEVELS 150mm
End cutting sawblade 150x3.2x55+4 Z32+4 CSEN750036 IT03 End...
End cutting sawblade 150x3.2x55+4 Z32+4 CSEN750036 IT03 End Trimming Unit
Stark rebate cutter steel body 150 x 50 mm
Stark rebate cutter steel body 150 x 50 mm
Stark rebate cutter steel body 150 x 50 mm
Stark rebate cutter steel body 150 x 50 mm
Stark rebate cutter steel body 150 x 50 mm
Stark rebate cutter steel body 150 x 50 mm
Stark rebate cutter steel body 150 x 50 mm
Stark rebate cutter steel body 150 x 50 mm
Stark rebate cutter steel body 150 x 50 mm
Stark rebate cutter steel body 150 x 50 mm
Single flute cutter for plastic and aluminium
Single flute cutter for plastic and aluminium
Spiral cutter with bevel for ALUCOBOND, DiBOND, REYNOBOND
Spiral cutter with bevel for ALUCOBOND, DiBOND, REYNOBOND
Spiral cutter for ALUCOBOND, DiBOND, REYNOBOND
Spiral cutter for ALUCOBOND, DiBOND, REYNOBOND
Solid carbide milling cutter with rounded chip chamber and...
Solid carbide milling cutter with rounded chip chamber and mirror grinding. Optimized cutting geometry for processing all non-ferrous metals.
Solid carbide milling cutter with rounded chip chamber and...
Solid carbide milling cutter with rounded chip chamber and mirror grinding. Optimized cutting geometry for processing all non-ferrous metals.
Solid carbide milling cutters for plastic processing,...
Solid carbide milling cutters for plastic processing, particularly suitable for acrylic. The spiral cuts result in virtually no heat development and the cutting pressure is very low. Cutting on the diameter with ground cut. Clockwise rotation
Solid carbide milling cutters for plastic processing,...
Solid carbide milling cutters for plastic processing, particularly suitable for acrylic. The spiral cuts result in virtually no heat development and the cutting pressure is very low. Cutting on the diameter with ground cut. Clockwise rotation
Solid carbide milling cutters for plastic processing,...
Solid carbide milling cutters for plastic processing, particularly suitable for acrylic. The spiral cuts result in virtually no heat development and the cutting pressure is very low. Cutting on the diameter with ground cut. Clockwise rotation
Solid carbide milling cutters for plastic processing,...
Solid carbide milling cutters for plastic processing, particularly suitable for acrylic. The spiral cuts result in virtually no heat development and the cutting pressure is very low. Cutting on the diameter with ground cut. Clockwise rotation
Solid carbide milling cutters for plastic processing,...
Solid carbide milling cutters for plastic processing, particularly suitable for acrylic. The spiral cuts result in virtually no heat development and the cutting pressure is very low. Cutting on the diameter with ground cut. Clockwise rotation
Spiral cutter Z1 Negative - Down cut for Plastics Suitable...
Spiral cutter Z1 Negative - Down cut for Plastics Suitable for: Acrylonitrile butadiene styrene (ABS) Polycarbonate Polyethylene Polypropylene Polystyrene Polyvinyl chloride (PVC) Polymethyl methacrylate (Acrylic. Plexi etc.)
Spiral cutter Z1 Positive - Upcut for Plastics Suitable for:...
Spiral cutter Z1 Positive - Upcut for Plastics Suitable for: Acrylonitrile butadiene styrene (ABS) Polycarbonate Polyethylene Polypropylene Polystyrene Polyvinyl chloride (PVC) Polymethyl methacrylate (Acrylic. Plexi etc.)
Spiral cutter Z1 Positive - Upcut for Plastics Suitable for:...
Spiral cutter Z1 Positive - Upcut for Plastics Suitable for: Acrylonitrile butadiene styrene (ABS) Polycarbonate Polyethylene Polypropylene Polystyrene Polyvinyl chloride (PVC) Polymethyl methacrylate (Acrylic. Plexi etc.)
Spiral cutter Z2 Positive - Upcut for Plastics Suitable for:...
Spiral cutter Z2 Positive - Upcut for Plastics Suitable for: Acrylonitrile butadiene styrene (ABS) Polycarbonate Polyethylene Polypropylene Polystyrene Polyvinyl chloride (PVC) Polymethyl methacrylate (Acrylic. Plexi etc.)
Spiral cutter Z2 Positive - Upcut for Plastics Suitable for:...
Spiral cutter Z2 Positive - Upcut for Plastics Suitable for: Acrylonitrile butadiene styrene (ABS) Polycarbonate Polyethylene Polypropylene Polystyrene Polyvinyl chloride (PVC) Polymethyl methacrylate (Acrylic. Plexi etc.)
Spiral finishing cutter downcut Z2
Spiral finishing cutter downcut Z2
Spiral finishing cutter upcut Z1
Spiral finishing cutter upcut Z1
Spiral finishing cutter downcut Z1
Spiral finishing cutter downcut Z1
Spiral finishing cutter upcut Z2
Spiral finishing cutter upcut Z2
Straight bit shank 8mm
Straight bit shank 8mm
Straight bit shank 8mm
Straight bit shank 8mm