Filter By
Availability
Shank
Diameter (D)
Cutting length/height:
Total Length
Radius / Angle
Cutters
for simultaneous machining of top and bottom edges. For...
for simultaneous machining of top and bottom edges. For material thickness up to 30 mm thickness.
S = M10x1,5 mm D = 18 mmL = 25 mmGL = 50 mm
S = M10x1,5 mm D = 18 mmL = 25 mmGL = 50 mm
S = M10x1,5 mm D = 18 mmL = 25 mmGL = 50 mm
S = M10x1,5 mm D = 18 mmL = 25 mmGL = 50 mm
S = M10x1,5 mm D = 18 mmL = 25 mmGL = 50 mm
S = M10x1,5 mm D = 18 mmL = 25 mmGL = 50 mm
S = M10x1,5 mm D = 18 mmL = 25 mmGL = 50 mm
S = M10x1,5 mm D = 18 mmL = 25 mmGL = 50 mm
Finishing cutter for through-hole milling Z3 For spy hole...
Finishing cutter for through-hole milling Z3 For spy hole milling and through holes
Guttering profile cutter for solid surface
Guttering profile cutter for solid surface
Lock case cutter rough toothing Z=3
Lock case cutter rough toothing Z=3
Replacement tip Straight bit Z=2 S=8
Replacement tip Straight bit Z=2 S=8
Replacement tip Straight bit Z=2 Shank 12 mm
Replacement tip Straight bit Z=2 Shank 12 mm
Replacement tip Straight bit Z=2 Shank 12 mm
Replacement tip Straight bit Z=2 Shank 12 mm
Replacement tip straight cutter internal thread M12x1
Replacement tip straight cutter internal thread M12x1
Replacement tip straight cutter internal thread M12x1
Replacement tip straight cutter internal thread M12x1
Roughing cutter for through-hole milling Z3 For pusher hole...
Roughing cutter for through-hole milling Z3 For pusher hole drilling and lock cylinder milling
Rounding and formatting cutterR3 S=8mm
Rounding and formatting cutterR3 S=8mm
For CNC machines Machinig operations on MDF and melamine HM...
For CNC machines Machinig operations on MDF and melamine HM plunging Tip Feed speed up to 15m/min
Single flute cutter for plastic and aluminium
Single flute cutter for plastic and aluminium
Spiral cutter with bevel for ALUCOBOND, DiBOND, REYNOBOND
Spiral cutter with bevel for ALUCOBOND, DiBOND, REYNOBOND
Spiral cutter for ALUCOBOND, DiBOND, REYNOBOND
Spiral cutter for ALUCOBOND, DiBOND, REYNOBOND
Solid carbide milling cutter with rounded chip chamber and...
Solid carbide milling cutter with rounded chip chamber and mirror grinding. Optimized cutting geometry for processing all non-ferrous metals.
Solid carbide milling cutter with rounded chip chamber and...
Solid carbide milling cutter with rounded chip chamber and mirror grinding. Optimized cutting geometry for processing all non-ferrous metals.
Solid carbide milling cutters for plastic processing,...
Solid carbide milling cutters for plastic processing, particularly suitable for acrylic. The spiral cuts result in virtually no heat development and the cutting pressure is very low. Cutting on the diameter with ground cut. Clockwise rotation
Solid carbide milling cutters for plastic processing,...
Solid carbide milling cutters for plastic processing, particularly suitable for acrylic. The spiral cuts result in virtually no heat development and the cutting pressure is very low. Cutting on the diameter with ground cut. Clockwise rotation
Solid carbide milling cutters for plastic processing,...
Solid carbide milling cutters for plastic processing, particularly suitable for acrylic. The spiral cuts result in virtually no heat development and the cutting pressure is very low. Cutting on the diameter with ground cut. Clockwise rotation
