For use on twist drills with a 10 mm shank and a diameter of 4...

For use on twist drills with a 10 mm shank and a diameter of 4 mm to 10 mm.The countersinkis guided to the shank via the drill spiral and fastened there.

For use on twist drills with a 10 mm shank and a diameter of 4...

For use on twist drills with a 10 mm shank and a diameter of 4 mm to 10 mm.The countersinkis guided to the shank via the drill spiral and fastened there.

Coving cutter with 90 degrees tangential outlet for solid surface

Coving cutter with 90 degrees tangential outlet for solid surface

Dovetail bit HW Z=2 D=20 A=10 degrees L=16 GL=52 S=10

Dovetail bit HW Z=2 D=20 A=10 degrees L=16 GL=52 S=10

Face milling bit HW Z=2 D=20 L=13 GL=45 S=8

Face milling bit HW Z=2 D=20 L=13 GL=45 S=8

Guttering cutter

Guttering cutter

Guttering cutter

Guttering cutter

Guttering cutter with high cutting length 12 mm Shank

Guttering cutter with high cutting length 12 mm Shank

Lock case cutter rough toothing Z=3

Lock case cutter rough toothing Z=3

Profile cutter ROG20

Profile cutter ROG20

Radius engraving cutter These double-edged cutters create a...

Radius engraving cutter These double-edged cutters create a flat of approx. 1 mm at the bottom.

Replacement tip Straight bit Z=2 Shank 12 mm

Replacement tip Straight bit Z=2 Shank 12 mm

Replacement tip Straight bit Z=2 Shank 12 mm

Replacement tip Straight bit Z=2 Shank 12 mm

Replacement tip straight cutter internal thread M12x1

Replacement tip straight cutter internal thread M12x1

Replacement tip straight cutter internal thread M12x1

Replacement tip straight cutter internal thread M12x1

Replacement tip straight cutter internal thread M12x1

Replacement tip straight cutter internal thread M12x1

Replacement tip straight cutter internal thread M12x1

Replacement tip straight cutter internal thread M12x1

Replacement tip Straight bit Z=2 S=8

Replacement tip Straight bit Z=2 S=8

Ballbearings diameter 16 mm and 12,7 mm included.

Ballbearings diameter 16 mm and 12,7 mm included.

Single flute cutter for plastic and aluminium

Single flute cutter for plastic and aluminium

Spiral cutter with bevel for ALUCOBOND, DiBOND, REYNOBOND

Spiral cutter with bevel for ALUCOBOND, DiBOND, REYNOBOND

Spiral cutter for ALUCOBOND, DiBOND, REYNOBOND

Spiral cutter for ALUCOBOND, DiBOND, REYNOBOND

Solid carbide milling cutter with rounded chip chamber and...

Solid carbide milling cutter with rounded chip chamber and mirror grinding. Optimized cutting geometry for processing all non-ferrous metals.

Solid carbide milling cutter with rounded chip chamber and...

Solid carbide milling cutter with rounded chip chamber and mirror grinding. Optimized cutting geometry for processing all non-ferrous metals.

Solid carbide milling cutters for plastic processing,...

Solid carbide milling cutters for plastic processing, particularly suitable for acrylic. The spiral cuts result in virtually no heat development and the cutting pressure is very low. Cutting on the diameter with ground cut. Clockwise rotation

Solid carbide milling cutters for plastic processing,...

Solid carbide milling cutters for plastic processing, particularly suitable for acrylic. The spiral cuts result in virtually no heat development and the cutting pressure is very low. Cutting on the diameter with ground cut. Clockwise rotation

Solid carbide milling cutters for plastic processing,...

Solid carbide milling cutters for plastic processing, particularly suitable for acrylic. The spiral cuts result in virtually no heat development and the cutting pressure is very low. Cutting on the diameter with ground cut. Clockwise rotation