Face milling bit D80 L12 S16mm
Face milling bit D=80 L=12 S=16mm
Face milling bit D=80 L=12 S=16mm
- -10%
- -10%
Filter By
Availability
Bore
Thickness
Shank
Diameter (D)
Cutting length/height:
Total Length
Radius / Angle
Cutters
There are 45 products.
Face milling bit D=80 L=12 S=16mm
Face milling bit D=80 L=12 S=16mm
Groover D=80 L=4 with bore 12 mm
Groover D=80 L=4 with bore 12 mm
Groover D=80 L=4 with bore 12 mm
Groover D=80 L=4 with bore 12 mm
Groover D=80 L=4 with bore 12 mm
Groover D=80 L=4 with bore 12 mm
Groover D=80 L=4 with bore 12 mm
Groover D=80 L=4 with bore 12 mm
Groover D=80 L=4 with bore 12 mm
Groover D=80 L=4 with bore 12 mm
Helical head for medium finishing with body in light alloy...
Helical head for medium finishing with body in light alloy equipped with 12 pieces 14x14x2 knives (600201) in HW with four cutting edges.
Helical head for medium finishing with body in light alloy
Helical head for medium finishing with body in light alloy
Helical head for medium finishing with body in light alloy
Helical head for medium finishing with body in light alloy
Helical head for medium finishing with body in light alloy...
Helical head for medium finishing with body in light alloy equipped with 12 pieces 14x14x2 knives (600201) in HW with four cutting edges.
Helical head for medium finishing with body in light alloy
Helical head for medium finishing with body in light alloy
LOW-NOISE 30° degrees pre-milling cutter 80x48x30+2KN...
LOW-NOISE 30° degrees pre-milling cutter 80x48x30+2KN CCEN350128
LOW-NOISE 30° pre-milling cutter 80x65x30+2KN CCEN350127
LOW-NOISE 30° pre-milling cutter 80x65x30+2KN CCEN350127
LOW-NOISE 45° pre-milling cutter 80x49x30+2KN CSEN350085 for...
LOW-NOISE 45° pre-milling cutter 80x49x30+2KN CSEN350085 for Biesse Machines
Overlapped trimmer with interchangeable knives 80 x 25 x...
Overlapped trimmer with interchangeable knives 80 x 25 x 16+2KN N3401N0428 RS10 Rough trimming unit
RT01 Pre milling cutter DP 80x55x30+2KN CW CCEN350035
RT01 Pre milling cutter DP 80x55x30+2KN CW CCEN350035
Single flute cutter for plastic and aluminium
Single flute cutter for plastic and aluminium
Spiral cutter with bevel for ALUCOBOND, DiBOND, REYNOBOND
Spiral cutter with bevel for ALUCOBOND, DiBOND, REYNOBOND
Spiral cutter for ALUCOBOND, DiBOND, REYNOBOND
Spiral cutter for ALUCOBOND, DiBOND, REYNOBOND
Solid carbide milling cutter with rounded chip chamber and...
Solid carbide milling cutter with rounded chip chamber and mirror grinding. Optimized cutting geometry for processing all non-ferrous metals.
Solid carbide milling cutter with rounded chip chamber and...
Solid carbide milling cutter with rounded chip chamber and mirror grinding. Optimized cutting geometry for processing all non-ferrous metals.
Solid carbide milling cutters for plastic processing,...
Solid carbide milling cutters for plastic processing, particularly suitable for acrylic. The spiral cuts result in virtually no heat development and the cutting pressure is very low. Cutting on the diameter with ground cut. Clockwise rotation
Solid carbide milling cutters for plastic processing,...
Solid carbide milling cutters for plastic processing, particularly suitable for acrylic. The spiral cuts result in virtually no heat development and the cutting pressure is very low. Cutting on the diameter with ground cut. Clockwise rotation
Solid carbide milling cutters for plastic processing,...
Solid carbide milling cutters for plastic processing, particularly suitable for acrylic. The spiral cuts result in virtually no heat development and the cutting pressure is very low. Cutting on the diameter with ground cut. Clockwise rotation
Solid carbide milling cutters for plastic processing,...
Solid carbide milling cutters for plastic processing, particularly suitable for acrylic. The spiral cuts result in virtually no heat development and the cutting pressure is very low. Cutting on the diameter with ground cut. Clockwise rotation
Solid carbide milling cutters for plastic processing,...
Solid carbide milling cutters for plastic processing, particularly suitable for acrylic. The spiral cuts result in virtually no heat development and the cutting pressure is very low. Cutting on the diameter with ground cut. Clockwise rotation
Spiral cutter Z1 Negative - Down cut for Plastics Suitable...
Spiral cutter Z1 Negative - Down cut for Plastics Suitable for: Acrylonitrile butadiene styrene (ABS) Polycarbonate Polyethylene Polypropylene Polystyrene Polyvinyl chloride (PVC) Polymethyl methacrylate (Acrylic. Plexi etc.)
Spiral cutter Z1 Positive - Upcut for Plastics Suitable for:...
Spiral cutter Z1 Positive - Upcut for Plastics Suitable for: Acrylonitrile butadiene styrene (ABS) Polycarbonate Polyethylene Polypropylene Polystyrene Polyvinyl chloride (PVC) Polymethyl methacrylate (Acrylic. Plexi etc.)
Spiral cutter Z1 Positive - Upcut for Plastics Suitable for:...
Spiral cutter Z1 Positive - Upcut for Plastics Suitable for: Acrylonitrile butadiene styrene (ABS) Polycarbonate Polyethylene Polypropylene Polystyrene Polyvinyl chloride (PVC) Polymethyl methacrylate (Acrylic. Plexi etc.)
Spiral cutter Z2 Positive - Upcut for Plastics Suitable for:...
Spiral cutter Z2 Positive - Upcut for Plastics Suitable for: Acrylonitrile butadiene styrene (ABS) Polycarbonate Polyethylene Polypropylene Polystyrene Polyvinyl chloride (PVC) Polymethyl methacrylate (Acrylic. Plexi etc.)