For use on twist drills with a 10 mm shank and a diameter of 4...

For use on twist drills with a 10 mm shank and a diameter of 4 mm to 10 mm.The countersinkis guided to the shank via the drill spiral and fastened there.

For use on twist drills with a 10 mm shank and a diameter of 4...

For use on twist drills with a 10 mm shank and a diameter of 4 mm to 10 mm.The countersinkis guided to the shank via the drill spiral and fastened there.

Coving cutter with 90 degrees tangential outlet for solid surface

Coving cutter with 90 degrees tangential outlet for solid surface

Diamond Rounding cuttter 58x10.5x16 R1 CCEN350170 For Biesse...

Diamond Rounding cuttter 58x10.5x16 R1 CCEN350170 For Biesse Akron 1100

Dovetail bit HW Z=2 D=20 A=10 degrees L=16 GL=52 S=10

Dovetail bit HW Z=2 D=20 A=10 degrees L=16 GL=52 S=10

Face milling bit HW Z=2 D=20 L=13 GL=45 S=8

Face milling bit HW Z=2 D=20 L=13 GL=45 S=8

Guttering cutter

Guttering cutter

Guttering cutter

Guttering cutter

Guttering cutter with high cutting length 12 mm Shank

Guttering cutter with high cutting length 12 mm Shank

Lock case cutter rough toothing Z=3

Lock case cutter rough toothing Z=3

PCD Rounding cuttter 58x10.5x16 R=3 CCEN350168 for Biesse...

PCD Rounding cuttter 58x10.5x16 R=3 CCEN350168 for Biesse Machines

Profile cutter ROG20

Profile cutter ROG20

Radius engraving cutter These double-edged cutters create a...

Radius engraving cutter These double-edged cutters create a flat of approx. 1 mm at the bottom.

Replacement tip Straight bit Z=2 Shank 12 mm

Replacement tip Straight bit Z=2 Shank 12 mm

Replacement tip Straight bit Z=2 Shank 12 mm

Replacement tip Straight bit Z=2 Shank 12 mm

Replacement tip straight cutter internal thread M12x1

Replacement tip straight cutter internal thread M12x1

Replacement tip straight cutter internal thread M12x1

Replacement tip straight cutter internal thread M12x1

Replacement tip straight cutter internal thread M12x1

Replacement tip straight cutter internal thread M12x1

Replacement tip straight cutter internal thread M12x1

Replacement tip straight cutter internal thread M12x1

Replacement tip Straight bit Z=2 S=8

Replacement tip Straight bit Z=2 S=8

Rounding cuttter 58x10.5x16 R=1.5 CCEN350171

Rounding cuttter 58x10.5x16 R=1.5 CCEN350171

Rounding cuttter 58x10.5x16 R=2 CCEN350169

Rounding cuttter 58x10.5x16 R=2 CCEN350169

Ballbearings diameter 16 mm and 12,7 mm included.

Ballbearings diameter 16 mm and 12,7 mm included.

Spiral finishing cutter upcut Z2

Spiral finishing cutter upcut Z2

Spiral finishing cutter upcut Z2

Spiral finishing cutter upcut Z2

Spiral finishing cutter upcut Z2

Spiral finishing cutter upcut Z2

Spiral finishing cutter upcut Z2

Spiral finishing cutter upcut Z2