Diamond Rounding cuttter...
Diamond Rounding cuttter 58x10.5x16 R1 CCEN350170 For Biesse...
Diamond Rounding cuttter 58x10.5x16 R1 CCEN350170 For Biesse Akron 1100
- -20%
- -20%
Filter By
Availability
Bore
Shank
Diameter (D)
Cutting length/height:
Total Length
Radius / Angle
Cutters
There are 33 products.
Diamond Rounding cuttter 58x10.5x16 R1 CCEN350170 For Biesse...
Diamond Rounding cuttter 58x10.5x16 R1 CCEN350170 For Biesse Akron 1100
Double rounding over / chamfer bit adjustable HW Z=2+2 D=22...
Double rounding over / chamfer bit adjustable HW Z=2+2 D=22 R=2,5 A=45 degrees Shank 12 mm
Double rounding over / chamfer bit adjustable HW Z=2+2 D=22...
Double rounding over / chamfer bit adjustable HW Z=2+2 D=22 R=2,5 A=45 degrees shank 8 mm
Finger pull Cutters D=22 R1=3 R2=1 S=12mm FPC22-12
Finger pull Cutters D=22 R1=3 R2=1 S=12mm FPC22-12
Guttering cutter for solid surface
Guttering cutter for solid surface
Miniature bevel cutter with bearing 45 degrees
Miniature bevel cutter with bearing 45 degrees
Miniature bevel cutter with bearing 45 degrees
Miniature bevel cutter with bearing 45 degrees
PCD Rounding cuttter 58x10.5x16 R=3 CCEN350168 for Biesse...
PCD Rounding cuttter 58x10.5x16 R=3 CCEN350168 for Biesse Machines
Profile mould cutter for hand holes in solid material
Profile mould cutter for hand holes in solid material
Profile mould cutter for hand holes in solid material
Profile mould cutter for hand holes in solid material
Profile mould cutter for hand holes in solid material
Profile mould cutter for hand holes in solid material
Replacement tip Straight bit Z=2 Shank 12 mm
Replacement tip Straight bit Z=2 Shank 12 mm
Rounding cuttter 58x10.5x16 R=1.5 CCEN350171
Rounding cuttter 58x10.5x16 R=1.5 CCEN350171
Rounding cuttter 58x10.5x16 R=2 CCEN350169
Rounding cuttter 58x10.5x16 R=2 CCEN350169
Rounding over cutter with guide pin shank 8 mm
Rounding over cutter with guide pin shank 8 mm
Rounding over cutter with bearing for solid surface materials
Rounding over cutter with bearing for solid surface materials
Rounding over cutter with extended and tapering cutting edges....
Rounding over cutter with extended and tapering cutting edges. This prevents adhesive residues from getting stuck between the cutting edges and the thrust bearing and causing excessive temperatures.
Rounding over cutter with extended and tapering cutting edges....
Rounding over cutter with extended and tapering cutting edges. This prevents adhesive residues from getting stuck between the cutting edges and the thrust bearing and causing excessive temperatures.
Straight bit shank 8mm
Straight bit shank 8mm
Straight bit shank 8mm
Straight bit shank 8mm
Straight bit shank 6 mm
Straight bit shank 6 mm