Diamond Rounding cuttter...
Diamond Rounding cuttter 58x10.5x16 R1 CCEN350170 For Biesse...
Diamond Rounding cuttter 58x10.5x16 R1 CCEN350170 For Biesse Akron 1100
- -20%
- -20%
Filter By
Availability
Bore
Shank
Diameter (D)
Cutting length/height:
Total Length
Radius / Angle
Cutters
There are 23 products.
Diamond Rounding cuttter 58x10.5x16 R1 CCEN350170 For Biesse...
Diamond Rounding cuttter 58x10.5x16 R1 CCEN350170 For Biesse Akron 1100
PCD Rounding cuttter 58x10.5x16 R=3 CCEN350168 for Biesse...
PCD Rounding cuttter 58x10.5x16 R=3 CCEN350168 for Biesse Machines
Replacement tip Straight bit Z=2 Shank 12 mm
Replacement tip Straight bit Z=2 Shank 12 mm
Replacement tip Straight bit Z=2 Shank 12 mm
Replacement tip Straight bit Z=2 Shank 12 mm
Replacement tip Straight bit Z=2 Shank 12 mm
Replacement tip Straight bit Z=2 Shank 12 mm
Replacement tip straight cutter internal thread M12x1
Replacement tip straight cutter internal thread M12x1
Replacement tip straight cutter internal thread M12x1
Replacement tip straight cutter internal thread M12x1
Replacement tip straight cutter internal thread M12x1
Replacement tip straight cutter internal thread M12x1
Replacement tip straight cutter internal thread M12x1
Replacement tip straight cutter internal thread M12x1
Rounding cuttter 58x10.5x16 R=1.5 CCEN350171
Rounding cuttter 58x10.5x16 R=1.5 CCEN350171
Rounding cuttter 58x10.5x16 R=2 CCEN350169
Rounding cuttter 58x10.5x16 R=2 CCEN350169
Ballbearings diameter 16 mm and 12,7 mm included.
Ballbearings diameter 16 mm and 12,7 mm included.
Rounding over cutter with extended and tapering cutting edges....
Rounding over cutter with extended and tapering cutting edges. This prevents adhesive residues from getting stuck between the cutting edges and the thrust bearing and causing excessive temperatures.
Rounding over cutter with extended and tapering cutting edges....
Rounding over cutter with extended and tapering cutting edges. This prevents adhesive residues from getting stuck between the cutting edges and the thrust bearing and causing excessive temperatures.
For milling a shadow gap or water surge at the basin and water...
For milling a shadow gap or water surge at the basin and water drainage channels on the sink.
Straight bit shank 8mm
Straight bit shank 8mm
Straight bit shank 8mm
Straight bit shank 8mm
Straight bit shank 12 mm
Straight bit shank 12 mm
Straight bit shank 12 mm
Straight bit shank 12 mm
Straight bit shank 12 mm
Straight bit shank 12 mm
Trimming bevel cutter with bearing
Trimming bevel cutter with bearing
V-Groove cutter 108° S8mm for ALUCOBOND, DiBOND, REYNOBOND
V-Groove cutter 108° S8mm for ALUCOBOND, DiBOND, REYNOBOND