Diamond Rounding cuttter...
Diamond Rounding cuttter 58x10.5x16 R1 CCEN350170 For Biesse...
Diamond Rounding cuttter 58x10.5x16 R1 CCEN350170 For Biesse Akron 1100
- -20%
- -20%
Filter By
Availability
Bore
Shank
Diameter (D)
Cutting length/height:
Total Length
Radius / Angle
Cutters
There are 11 products.
Diamond Rounding cuttter 58x10.5x16 R1 CCEN350170 For Biesse...
Diamond Rounding cuttter 58x10.5x16 R1 CCEN350170 For Biesse Akron 1100
PCD Rounding cuttter 58x10.5x16 R=3 CCEN350168 for Biesse...
PCD Rounding cuttter 58x10.5x16 R=3 CCEN350168 for Biesse Machines
Rounding cuttter 58x10.5x16 R=1.5 CCEN350171
Rounding cuttter 58x10.5x16 R=1.5 CCEN350171
Rounding cuttter 58x10.5x16 R=2 CCEN350169
Rounding cuttter 58x10.5x16 R=2 CCEN350169
Solid carbide milling cutter with rounded chip chamber and...
Solid carbide milling cutter with rounded chip chamber and mirror grinding. Optimized cutting geometry for processing all non-ferrous metals.
Solid carbide milling cutters for plastic processing,...
Solid carbide milling cutters for plastic processing, particularly suitable for acrylic. The spiral cuts result in virtually no heat development and the cutting pressure is very low. Cutting on the diameter with ground cut. Clockwise rotation
Spiral cutter Z1 Negative - Down cut for Plastics Suitable...
Spiral cutter Z1 Negative - Down cut for Plastics Suitable for: Acrylonitrile butadiene styrene (ABS) Polycarbonate Polyethylene Polypropylene Polystyrene Polyvinyl chloride (PVC) Polymethyl methacrylate (Acrylic. Plexi etc.)
Spiral cutter Z1 Positive - Upcut for Plastics Suitable for:...
Spiral cutter Z1 Positive - Upcut for Plastics Suitable for: Acrylonitrile butadiene styrene (ABS) Polycarbonate Polyethylene Polypropylene Polystyrene Polyvinyl chloride (PVC) Polymethyl methacrylate (Acrylic. Plexi etc.)
Spiral cutter Z1 Positive - Upcut for Plastics Suitable for:...
Spiral cutter Z1 Positive - Upcut for Plastics Suitable for: Acrylonitrile butadiene styrene (ABS) Polycarbonate Polyethylene Polypropylene Polystyrene Polyvinyl chloride (PVC) Polymethyl methacrylate (Acrylic. Plexi etc.)
Straight bit shank 8mm
Straight bit shank 8mm
Straight bit shank 6 mm
Straight bit shank 6 mm