Diamond Rounding cuttter...
Diamond Rounding cuttter 58x10.5x16 R1 CCEN350170 For Biesse...
Diamond Rounding cuttter 58x10.5x16 R1 CCEN350170 For Biesse Akron 1100
- -20%
- -20%
Filter By
Availability
Bore
Shank
Diameter (D)
Cutting length/height:
Total Length
Radius / Angle
Cutters
There are 22 products.
Diamond Rounding cuttter 58x10.5x16 R1 CCEN350170 For Biesse...
Diamond Rounding cuttter 58x10.5x16 R1 CCEN350170 For Biesse Akron 1100
Finger pull Cutters D=22 R1=3 R2=1 S=12mm FPC22-12
Finger pull Cutters D=22 R1=3 R2=1 S=12mm FPC22-12
Knife in HW 16.5x16x2 R=1 CCEN700013
Knife in HW 16.5x16x2 R=1 CCEN700013
Knife in HW R=1 N3402N0123
Knife in HW R=1 N3402N0123
Knife in HW R=1/2/25 degrees CSEN700025
Knife in HW R=1/2/25 degrees CSEN700025
Knife in HW R=1/2/25 degrees CSEN700026
Knife in HW R=1/2/25 degrees CSEN700026
Rounding cutter 60 x 9 x 20+2KN R1 CW N3401N0284
Rounding cutter 60 x 9 x 20+2KN R1 CW N3401N0284
Rounding cutter with interchangeable knives 60/70X16X16+2KN...
Rounding cutter with interchangeable knives 60/70X16X16+2KN R=1 CCW 3401A0356
Rounding cutter with interchangeable knives 60/70X16X16+2KN R1...
Rounding cutter with interchangeable knives 60/70X16X16+2KN R1 CW 3401A0355
Rounding over cutter with bearing for solid surface materials
Rounding over cutter with bearing for solid surface materials
Rounding over cutter with extended and tapering cutting edges....
Rounding over cutter with extended and tapering cutting edges. This prevents adhesive residues from getting stuck between the cutting edges and the thrust bearing and causing excessive temperatures.
Rounding over cutter with extended and tapering cutting edges....
Rounding over cutter with extended and tapering cutting edges. This prevents adhesive residues from getting stuck between the cutting edges and the thrust bearing and causing excessive temperatures.
Tilted fine trimmer 75x25x16+2KN R=1/1,5/2/25 degrees CCW...
Tilted fine trimmer 75x25x16+2KN R=1/1,5/2/25 degrees CCW N3401N0396
Tilted fine trimmer 75x25x16+2KN R=1/1,5/2/25 degrees CW...
Tilted fine trimmer 75x25x16+2KN R=1/1,5/2/25 degrees CW N3401N0395
Tilted fine trimmer 75x25x16+2KN R=1/2/3/25 degrees CCW...
Tilted fine trimmer 75x25x16+2KN R=1/2/3/25 degrees CCW N3401N0394
Tilted fine trimmer 75x25x16+2KN R=1/2/3/25 degrees CW N3401N0393
Tilted fine trimmer 75x25x16+2KN R=1/2/3/25 degrees CW N3401N0393
Tilted trimmer with interchangeable knives 75x20x16+2KN R=1...
Tilted trimmer with interchangeable knives 75x20x16+2KN R=1 N3401N0431
Trimmer 73.21/69.8x16x16+2KN r=1 LH CCEN350130
Trimmer 73.21/69.8x16x16+2KN r=1 LH CCEN350130